Posted by Steve --Previous Message--
on 10/25/2007, 6:45 pm, in reply to "'80 Malibu for sale"
72.222.189.225
Please shoot me pics pete. I have been wanting one of these for a while now.
: 1980 Chevrolet Malibu 2-door for sale, clear
: title, was going to turn into a street/strip
: car, but have changed directions. Car was
: originally equipped w/a 3.8 V-6/Metric
: tranny combo. Car has original faded light
: blue paint. Body is in good condition w/no
: sheetmetal damage. Car has never been in a
: collision. Body has no rust, no frame rot.
: Overall condition is fairly rough. Entire
: original interior is still in car, but in
: very poor condition. Urethane body moldings
: are mostly dry rotted. Passenger rear
: quarter window has been broken out. Front
: windshield is cracked. Remaining glass is
: in good condition. Doors, windows, &
: trunk lid are all OEM functional. Steering
: column is still in car, and car includes an
: extra complete steering column. Front clip
: & front suspension/brakes have been
: removed. Engine & transmission have
: been removed from car. Heater & A/C box
: have been removed from car and thrown away,
: as well as inner fenders. Firewall &
: front frame stub have been partially cleaned
: & painted w/epoxy chassis gloss black.
: GM manual steering box has been installed.
: Chromemoly tubular upper A-arms w/aluminum
: cross shafts installed w/AFCO low-friction
: upper ball joints also installed. Remaining
: suspension & front brakes need to be
: cleaned, assembled & installed. Car
: includes new AFCO low-friction lower ball
: joints, new Global West Del-a-Lum lower
: A-arm bushings, new center link, new idler
: arm (already installed), new inner tie rods,
: and new IMCA-style outer tie rod assemblies
: (includes tubular steel tie rod adjusting
: sleeves w/jam nuts, heim joint outer tie rod
: ends, and adjustable tie rod-to-spindle
: links to eliminate bump steer). Factory
: front disc brakes included but need cleaned
: and overhauled. Car includes 4130
: chromemoly tubular lightweight transmission
: crossmember for TH350/Powerglide, and is
: built to clear dual exhaust. Car still has
: original 7.5” 10-bolt rear end (no idea on
: gear ratio), but also includes a Mexican
: G-body Dana 44 rear end, which is a direct
: bolt-in w/factory G-body suspension. Dana
: 44 includes complete drum brakes, e-brake
: cables, bolt-in 30-spline axles, and factory
: cover, but needs carrier & gears (spool
: & gears available cheap). Car includes
: double-adjustable heim-joint rear upper
: control arms for 12-bolt swap and new rear
: coil spring axle housing perches for A-body
: 12-bolt swap if you want to swap in a
: ’64-‘72 A-body 12-bolt rear end into car
: (parts also work to swap a ’73-’77 A-body
: 8.5” 10-bolt into G-body). Car includes
: complete new Prothane polyurethane body
: mount bushing & hardware kit. $700.00
: O.B.O. … motivated seller!!! Thanks!
:
Message Thread:
« Back to thread