Posted by Pete
on 5/22/2008, 7:18 pm
68.230.6.68
This is a fresh CSU 850 cfm carb for sale. It has not been bolted on or ran since prepped by CSU. It was originally a Holley 0-4781. It has CSU billet annular boosters, the throttle shafts have been bushed and capped, the choke horn has been milled, air bleeds converted to screw-in, .136" down-flow needle & seats installed, standard power valve in primary, billet CSU adjustable boost referenced power valve w/pick-up tube extension in secondary, 74/87 jets w/jet extensions in secondary & notched rear float, PVCR's enlarged (looks like .080"-.090", but haven't measured it), non-stick bowl & metering block gaskets, reusable nylon bowl screw washers, 50cc accelerator pumps front & rear, etc., etc. This carb was originally spec'd for a street/strip 383 SBC w/9.5:1 compression, Dart 215 Iron Eagle heads, Bullet solid roller (240's @ .050", mid-.600" lift, 114 lsa), and a Borg Warner S400 (75mm) turbo running 12-16 lbs. of boost. Per CSU, the carb should work well on 350-400 cubic inch engines with 72mm or larger turbo(s). Looks like these are $1,050.00 on the CSU website. Here's your chance to save a few bucks! $700.00 o.b.o., free shipping in the continental United States. Thanks!
Pete
Message Thread:
« Back to thread