Posted by Pete
on 5/28/2008, 10:20 pm
68.230.6.68
Comp Cams custom grind hydraulic roller cam for supercharged small block Chevy, good for 380-420 cubic inch SBC w/centrifugal supercharger, roots-style supercharger, or medium-to-large nitrous system (will also work well in EFI engine w/aftermarket ECM):
-Part # 12-000-8
-Serial # N 3546-08
-Grind # CS 3151 / 3152 HR114 +4
-Advertised duration; 318 intake, 329 exhaust
-Duration @ .050"; 252 intake, 262 exhaust
-Lobe lift; .360" intake, .360" exhaust
-Lift w/1.5 ratio rockers; .540" intake, .540" exhaust
-Valve timing; intake opens 16 BTDC & closes 56 ABDC, exhaust opens 69 BBDC & closes 13 ATDC
-114 lobe separation
-110 intake centerline
-1.050" base circle, will clear up to 3.875" stroke
This cam is new-in-the-box. I also have a set of new-in-the-box Comp Cams Pro Magnum hydraulic roller lifters for sale:
-Part # 885-16
These are a retro-fit style lifter w/link bars for early non-roller Chevrolet engine blocks, as well as aftermarket blocks such as Dart Little M and World Motown. These lifters are good to 8,000+ RPM with the right valvetrain components.
$240.00 for the cam, $450.00 for the lifters, $650.00 if you buy them as a package, please add 3% if paying by PayPal, buyer pays shipping (standard UPS ground rates, no mark-up). Thanks!
Pete
Message Thread:
« Back to thread