Posted by Pete on 5/30/2008, 11:40 pm, in reply to "CSU blow through 850 carb for sale..."
68.230.6.68
--Previous Message--
: This is a fresh CSU 850 cfm carb for sale. It
: has not been bolted on or ran since prepped
: by CSU. It was originally a Holley 0-4781.
: It has CSU billet annular boosters, the
: throttle shafts have been bushed and capped,
: the choke horn has been milled, air bleeds
: converted to screw-in, .136" down-flow
: needle & seats installed, standard power
: valve in primary, billet CSU adjustable
: boost referenced power valve w/pick-up tube
: extension in secondary, 74/87 jets w/jet
: extensions in secondary & notched rear
: float, PVCR's enlarged (looks like
: .080"-.090", but haven't measured
: it), non-stick bowl & metering block
: gaskets, reusable nylon bowl screw washers,
: 50cc accelerator pumps front & rear,
: etc., etc. This carb was originally spec'd
: for a street/strip 383 SBC w/9.5:1
: compression, Dart 215 Iron Eagle heads,
: Bullet solid roller (240's @ .050",
: mid-.600" lift, 114 lsa), and a Borg
: Warner S400 (75mm) turbo running 12-16 lbs.
: of boost. Per CSU, the carb should work
: well on 350-400 cubic inch engines with 72mm
: or larger turbo(s). Looks like these are
: $1,050.00 on the CSU website. Here's your
: chance to save a few bucks! $700.00 o.b.o.,
: free shipping in the continental United
: States. Thanks!
:
: Pete
:
Carb is sold.
Message Thread:
« Back to thread