Posted by Pete on 9/21/2008, 10:25 am, in reply to "Misc. used SBC engine parts for sale..."
98.167.161.1
C.A.T. damper is sold.
--Previous Message--
: -Edelbrock Performer RPM intake manifold
: #7101, excellent condition, $100.00
: (includes bolts).
:
: -C.A.T. SFI-approved harmonic fluid-damper,
: internally balanced, 6-3/4" diameter,
: laser-etched timing marks, like-new
: condition, $50.00 (includes bolt &
: washer).
:
: -stock 168 tooth flexplate, internally
: balanced, for two-piece rear main seal
: engine, excellent condition, no teeth damage
: or abnormal wear, $20.00 (includes bolts).
:
: -mystery hydraulic flat tappet camshaft
: w/Sealed Power lifters, no part # or brand
: markings on cam, compatible with stock valve
: springs and factory valvetrain, had slight
: lope @ idle in 9.5:1 327 engine, made
: excellent low-end & mid-range torque
: & pulled cleanly to 5,500 RPM, no idea
: on duration/lift/lobe separation, cam &
: lifters are in excellent condition, $40.00
: (includes cam gear bolts).
:
: -Cloyes true roller timing chain set &
: gears, excellent condition, $15.00 (includes
: cam gear bolts).
:
: -Forged steel 327 large journal crankshaft
: ('68-'69), factory GM forged 1053 steel,
: crank is .010"/.010" on the rods
: & mains and is excellent condition, this
: is a somewhat hard to find crank (large
: journal), $250.00.
:
: -Set of (8) GM forged steel "X"
: rods w/factory rod bolts, excellent
: condition, no out-of-round or taper issues,
: $40.00.
:
: -Stock GM stamped steel 5-quart passenger
: car oil pan & timing cover with timing
: tab, driver's side dipstick, for two-piece
: rear main seal engine, $20.00 for the pan
: & cover (includes bolts).
:
: -Stock length factory replacement GM
: pushrods for flat tappet camshaft,
: $5.00/set.
:
: -Stock length hardened Speed-O-Motive
: pushrods for flat tappet camshaft,
: $10.00/set.
:
: -Set of factory GM head bolts, $5.00/set.
:
: All of this stuff is used and came from a
: well maintained 327 SBC with just under
: 5,000 miles. All prices are O.B.O. Thanks!
:
: Pete
:
Message Thread:
« Back to thread