Posted by Rick
on 11/28/2008, 12:31 am, in reply to "Misc. used SBC engine parts for sale..."
204.193.208.104
Hey Pete, I might be interested in some of them 327 parts if you still have them? Let me know and if you do, we'll get togethere and I'll get some cash together for ya OK? let me know when you can .. Billie Jo's Vega has always had a large journal 327 in it and I have 2 of em but 1 has gotten prity worn out! LOL Well, Let me know, If you sold it that's cool too, just let me know. Thanks, Rick Dahmer.
--Previous Message--
: -Edelbrock Performer RPM intake manifold
: #7101, excellent condition, $100.00
: (includes bolts).
:
: -C.A.T. SFI-approved harmonic fluid-damper,
: internally balanced, 6-3/4" diameter,
: laser-etched timing marks, like-new
: condition, $50.00 (includes bolt &
: washer).
:
: -stock 168 tooth flexplate, internally
: balanced, for two-piece rear main seal
: engine, excellent condition, no teeth damage
: or abnormal wear, $20.00 (includes bolts).
:
: -mystery hydraulic flat tappet camshaft
: w/Sealed Power lifters, no part # or brand
: markings on cam, compatible with stock valve
: springs and factory valvetrain, had slight
: lope @ idle in 9.5:1 327 engine, made
: excellent low-end & mid-range torque
: & pulled cleanly to 5,500 RPM, no idea
: on duration/lift/lobe separation, cam &
: lifters are in excellent condition, $40.00
: (includes cam gear bolts).
:
: -Cloyes true roller timing chain set &
: gears, excellent condition, $15.00 (includes
: cam gear bolts).
:
: -Forged steel 327 large journal crankshaft
: ('68-'69), factory GM forged 1053 steel,
: crank is .010"/.010" on the rods
: & mains and is excellent condition, this
: is a somewhat hard to find crank (large
: journal), $250.00.
:
: -Set of (8) GM forged steel "X"
: rods w/factory rod bolts, excellent
: condition, no out-of-round or taper issues,
: $40.00.
:
: -Stock GM stamped steel 5-quart passenger
: car oil pan & timing cover with timing
: tab, driver's side dipstick, for two-piece
: rear main seal engine, $20.00 for the pan
: & cover (includes bolts).
:
: -Stock length factory replacement GM
: pushrods for flat tappet camshaft,
: $5.00/set.
:
: -Stock length hardened Speed-O-Motive
: pushrods for flat tappet camshaft,
: $10.00/set.
:
: -Set of factory GM head bolts, $5.00/set.
:
: All of this stuff is used and came from a
: well maintained 327 SBC with just under
: 5,000 miles. All prices are O.B.O. Thanks!
:
: Pete
:
Message Thread:
« Back to thread