Posted by Pete
on 12/17/2008, 7:14 pm
98.167.160.4
-Edelbrock Performer RPM intake manifold #7101 for small block Chevrolet, used, excellent condition, no porting, $100.00 O.B.O.
-Edelbrock Victor Jr. intake manifold #2999 for small block Chevrolet (same as 2975 but with 1" taller plenum), used, drilled for fogger nozzles (plugged), drilled & tapped for rear coolant fittings (-8AN included), excellent condition, no porting, includes 1" aluminum carb spacer, $150.00 O.B.O.
-Holley 0-3310S 750 cfm vacuum secondary carb w/manual choke, used, excellent condition, less than 5,000 miles of use, recent freshen up (under 10 miles since freshened), includes chrome dual feed line, $150.00 O.B.O.
-Holley 0-4777 650 cfm mechanical secondary carb, no choke, used, excellent condition, could probably use fresh gaskets & pump diaphragms, $150.00 O.B.O.
-Holley replacement carb for Rochester two-barrel emissions carb on GM application, brand new, never installed/used, no idea on list # or any other info on carb, $50.00 O.B.O.
-Generic 10" torque converter, TH350/TH400/Glide w/turbo shaft, anti-ballooning plates, torrington bearings instead of thrust washers, 3,000 RPM stall speed, like new condition, used several hundred miles in street car, $150.00 O.B.O.
-Mallory 2-port fuel pressure regulator for carb, non-return style, used, excellent condition, includes -10 inlet & -8 outlet fittings, $30.00 O.B.O.
-Stock GM HEI distributor, used, good condition, no idea on miles, complete ready to go, $40.00 O.B.O.
-Set of Accel 8.8mm plug wires, yellow in color, used, excellent condition, fitted for SBC w/headers, $30.00 O.B.O.
-Stock cast iron long water pump for SBC, used, excellent condition, $10.00 O.B.O.
-Stock GM 18" 7-blade clutch fan, used, excellent condition, $10.00 O.B.O.
-Stock GM G-body ('78-'88 Malibu, Monte Carlo, Regal, Cutlass, Grand Prix) two core radiator w/built-in tranny cooler, used, good condition, $20.00 O.B.O.
-Set of (8) Ross forged pistons for 540 BBC (4.500" bore x 4.250" stroke), profiled max-dome design, static 14.6:1 compression ratio w/119cc open chamber heads & .043" head gasket w/zero deck, tapered wall tool steel wrist pins, attached to set of (8) 4340 forged steel Manley H-beam connecting rods (6.535" length) w/ARP capscrews, used, excellent condition, $300.00 O.B.O. for pistons/rods.
Thanks,
Pete
Message Thread:
« Back to thread