Posted by JB(MS) on 8/10/2009, 10:33 am, in reply to "LEDs"
66.175.148.151
LED Control
Main Menu LED position #1
General programming procedure:
1) Tap the Menu Key - Main Menu activation indicated by flashing LED.
2) Using the Right Key move the flashing LED to position #1.
3) Tap the Enter Key - LED Sub-Menu entered, no flashing LED.
4) To Turn off the Display move the LED to position #10 or......
5) To Turn on Display select LED lock-on time i.e. any position #9 through #1.
Note: Number on Display corresponds to Target ID Lock-on time.
6) Exit LED Sub-Menu using one of the following:
A) Toggle the Mode Toggle Switch to return to normal operation or......
B) Tap the Menu Key to return to normal operation or......
C) Tap the Enter Key to return to Main Menu.
7) To Turn on SST Scanning:
A) Enter LED Sub-Menu as described above and select LED lock-on time.
B) Press and hold down Enter Key.
C) Press the Right Key.
D) Release both keys.
E) Main Menu activation indicated by flashing LED.
8) To Turn Off SST Scanning:
A) Enter LED Sub-Menu as described above and select LED lock-on time
B) Press and hold down Enter Key.
C) Press the Left Key.
D) Release both keys.
E) Main Menu activation indicated by flashing LED.
9) Exit Main Menu using one of the following:
A) Toggle the Mode Toggle Switch to return to normal operation or......
B) Tap the Menu Key to return to normal operation.
Message Thread:
« Back to thread