A Discovery Electronics Metal Detector Forum : Re: Cointrax II

A Discovery Electronics Metal Detector Forum
[ Post a Response | A Discovery Electronics Metal Detector Forum ]

Re: Cointrax II

Posted by Ron Huddleston on 9/1/2011, 5:49 pm, in reply to "Re: Cointrax II"
68.2.249.13

JB - I have the cointrax with the 2.2 chip and resistor installed. Standard Discrimination is turned off in both Motion and All Metal mode. I position the flashing led at position #9 press enter and the LED is blank on both motion and All Metal Mode - so I guess I do not know what to do next. I thought I understood that SD needed to be turned off. Still confused and not sure what to do next.

Message Thread

Cointrax II - Ron Huddleston 8/31/2011, 6:23 pm
- Re: Cointrax II - JB(MS) 8/31/2011, 8:57 pm
  - Re: Cointrax II - Mr.Bill 9/1/2011, 8:50 am
    - Re: Cointrax II - Ron Huddleston 9/1/2011, 3:35 pm
  - Re: Cointrax II - Ron Huddleston 9/1/2011, 12:05 pm
    - Re: Cointrax II - JB(MS) 9/1/2011, 4:32 pm
      - Re: Cointrax II - Ron Huddleston 9/1/2011, 5:49 pm
        
        Question for you Ron - Mr.Bill 9/1/2011, 7:01 pm
        
        New Settings - Ron Huddleston 9/3/2011, 1:39 pm
        
        Re: Cointrax II - JB(MS) 9/1/2011, 7:47 pm
        
        Re: Cointrax II - Ron Huddleston 9/3/2011, 1:12 pm
        
        Re: Cointrax II - JB(MS) 9/3/2011, 8:18 pm
        
        Re: Cointrax II - Ron Huddleston 9/4/2011, 11:02 am
        
        Re: Cointrax II - JB(MS) 9/4/2011, 1:54 pm
        
        What I said was - Mr.Bill 9/4/2011, 1:59 pm
        
        Adjusting - Ron Huddleston 9/4/2011, 2:26 pm
        
        Re: Adjusting - JB(MS) 9/4/2011, 3:24 pm
        
        Re: Adjusting - Ron Huddleston 9/4/2011, 7:12 pm
« Back to index