Metal Detecting Equipment

Metal Detecting Equipment
[ Post a Message | Old forum archive ]

Archives User comments and opinions are welcomed here. This site is not sponsored by any dealer or manufacturer of detecting equipment. Everyone is encouraged to speak out in a responsible manner expressing both good and bad experiences with any make, model or brand detector or accessory. Our mission is to increase the knowledge base of all readers by sharing our collective insight and to provide sound advice without editorial bias.

Page: 1 2 3 4

Tejon mod. question - Rick, N. MI 10/6/2008, 6:23 pm
- Re: Tejon mod. question - Bjorn Yesterday, 1:41 pm
Fantasy Machine?? - BamaBill 10/5/2008, 1:27 pm
- Re: Fantasy Machine?? - Carl 10/6/2008, 1:31 am
  - Re: Fantasy Machine?? - BamaBill 10/6/2008, 11:16 am
- Re: Fantasy Machine?? - Bjorn 10/5/2008, 4:19 pm
  - Re: Fantasy Machine?? - BamaBill 10/6/2008, 11:11 am
    - Re: Fantasy Machine?? - BamaBill Yesterday, 11:58 am
      - Re: Fantasy Machine?? - Bob sw.mo Yesterday, 4:29 pm
Ifo - chuck 10/3/2008, 7:38 pm
- Re: Ifo - BlazoBill 10/4/2008, 8:29 am
  - Re: Ifo - chuck 10/5/2008, 7:41 am
    - Re: Ifo - BlazoBill 10/5/2008, 9:48 am
Garrett Made A Video On Their New PRO-POINTER - John - Edmonton 10/2/2008, 7:46 pm
- WHAT KIND OF ---- - CLARK 10/3/2008, 1:40 pm
  - I Am Getting Up To 3" On Coins.... - John - Edmonton 10/4/2008, 8:45 am
    - Re: I Am Getting Up To 3" On Coins.... - Daniel 10/4/2008, 8:38 pm
- Re: Garrett Made A Video On Their New PRO-POINTER - LowBoy 10/2/2008, 10:52 pm
  - Uniprobe. - Bjorn 10/3/2008, 12:24 am
    - Thanks guys ! n/t - Bjorn 10/3/2008, 3:22 pm
    - Re: Uniprobe. - Scully 10/3/2008, 9:06 am
    - Re: Uniprobe. - Daniel 10/3/2008, 8:55 am
    - Re: Uniprobe. - John - Edmonton 10/3/2008, 8:39 am
Garrett - PaulWV 10/1/2008, 7:38 am
- They Recently Came Out With The PRO-Pointer - John - Edmonton 10/1/2008, 4:45 pm
Better Detector - chuck scardino 9/29/2008, 7:16 pm
- Re: Better Detector - Paul (Ca) 9/29/2008, 10:21 pm
  - Re: Better Detector - BamaBill 10/2/2008, 9:51 am
- Re: Better Detector - OzarkTom 9/29/2008, 9:32 pm
Better metal detector - chuck 9/29/2008, 7:06 pm
- Re: Better metal detector - Daniel 9/29/2008, 9:29 pm
Something Different...."I Reached My 100,00th Coin Milestone Yesterday - John - Edmonton 9/28/2008, 5:45 pm
- Enough to buy you a car! - Paul (Ca) 9/29/2008, 10:24 pm
- Congratulations, John!! - Carl 9/28/2008, 7:04 pm
  - Re: Congratulations, John!! - OzarkTom 9/28/2008, 11:33 pm
Can they really see through iron? - crazyman 9/28/2008, 2:25 pm
- magnetically speaking. - Jbird 10/5/2008, 5:19 pm
- Re: Can they really see through iron? - john37115 9/30/2008, 11:18 pm
- Re: Can they really see through iron? - Tom_in_CA 9/29/2008, 12:26 am
  - I know air tests are one thing but....... - crazyman 9/29/2008, 1:12 pm
    - Re: I know air tests are one thing but....... - Daniel 9/29/2008, 6:46 pm
- Re: Can they really see through iron? - Daniel 9/28/2008, 10:28 pm
- Re: Can they really see through iron? - Carl 9/28/2008, 9:46 pm
  - that happened to me too - scott (wi) 9/30/2008, 10:48 am
  - I've had similar Experiences - crazyman 9/29/2008, 12:18 pm
    - Re: I've had similar Experiences - scott (wi) 9/30/2008, 10:59 am
  - Carl, you could have.... - Pat 9/29/2008, 8:33 am
- Re: Can they really see through iron? - Steve(MS) 9/28/2008, 8:01 pm
- Re: Can they really see through iron? - Tom NWMI 9/28/2008, 5:51 pm
Ergonomics versus performance - Carl 9/26/2008, 1:08 pm
- Re: Ergonomics versus performance - Andy,NM 9/29/2008, 2:30 pm
- I'll take performance over ergonomics. - crazyman 9/29/2008, 1:39 pm
  - Re: I'll take performance over ergonomics. - BamaBill 9/29/2008, 4:01 pm
    - Re: I'll take performance over ergonomics. - crazyman 9/29/2008, 5:08 pm
- Re: Ergonomics - heck, an invention to assist with legs and knees would be #1 - Terry Bradley 9/28/2008, 10:54 pm
  - Re: Ergonomics - heck, an invention to assist with legs and knees would be #1 - jackintexas 10/2/2008, 10:09 am
  - Re: Ergonomics - heck, an invention to assist with legs and knees would be #1 - Carl 10/1/2008, 2:30 pm
    - Re: Ergonomics - Carl, you can count on that. Thanks for the cane idea, I'll try it. n/t - Terry Bradley 10/2/2008, 1:06 am
- Re: Ergonomics versus performance - bjorn 9/27/2008, 11:42 am
  - Re: Ergonomics versus performance - BamaBill 9/29/2008, 4:06 pm
- Amen to the weight issue - Jerry Talley 9/27/2008, 8:20 am
  - battery pack.. That's an excellent idea - Tom NWMI 9/28/2008, 8:46 am
  - Re: Amen to the weight issue - Jerry 9/27/2008, 9:17 am
    - Re: Amen to the weight issue - Brian 9/29/2008, 3:44 am
- Re: Ergonomics versus performance - Tom NWMI 9/26/2008, 11:14 pm
  - Re: Ergonomics versus performance - Neil 9/27/2008, 9:00 am
Minelab sd2200v2 or Whites TDI - wayne 9/24/2008, 3:47 pm
- Re: Minelab sd2200v2 or Whites TDI - Wayne Angell 9/30/2008, 5:58 pm
E-Trac - Carl 9/23/2008, 1:01 am
- Re: E-Trac - George Kinsey 9/24/2008, 5:01 am
Help - PaulWV 9/22/2008, 7:35 am
- Re: Help - Carl 9/22/2008, 9:26 am
  - Re: Help - PaulWV 9/22/2008, 12:18 pm
WANTED: Old Compass X-70 - Arthur-Canada 9/20/2008, 2:52 pm
Threshold on a Digital Detector? - BamaBill 9/18/2008, 2:20 pm
Garrett ACE 250 big coil questions - Paul Hepp 9/16/2008, 10:39 pm
- Re: Garrett ACE 250 big coil questions - jeff@middlesex 9/21/2008, 8:29 am
white's customer 's service - clark 9/16/2008, 3:44 pm
- Re: white's customer 's service - farzad 9/21/2008, 5:55 am
- Re: white's customer 's service - crazyman 9/17/2008, 8:42 pm
- Re: white's customer 's service - Robert 9/17/2008, 6:53 pm
- Re: white's customer 's service - Carl-NC 9/17/2008, 6:38 pm
  - thanks Carl for ---- - clark 9/19/2008, 8:53 pm
- Re: white's customer 's service - DL 9/17/2008, 2:38 pm
- White's has great service, you had a fluke situation - Jerry Talley 9/17/2008, 2:46 am
- Re: white's customer 's service - JM 9/16/2008, 10:53 pm
- Re: white's customer 's service - clark 9/16/2008, 10:08 pm
  - Re: white's customer 's service - Bob sw.mo 9/18/2008, 1:18 pm
  - Re: white's customer 's service - Carl-NC 9/17/2008, 1:59 am
- Re: white's customer 's service - Carl-NC 9/16/2008, 7:48 pm
- Re: white's customer 's service - Jerry 9/16/2008, 5:51 pm
- Re: white's customer 's service - Steve Herschbach 9/16/2008, 5:13 pm
  - Re: white's customer 's service - clark 9/17/2008, 12:40 am
    - free download - jeff@middlesex 9/17/2008, 6:44 am
- Time to move up to a Minelab - Arthur-Canada 9/16/2008, 4:21 pm
You never know what you might find in the closet. - crazyman 9/16/2008, 11:11 am
- That's one nice skeleton!! - Arthur-Canada 9/16/2008, 4:27 pm
  - Re: That's one nice skeleton!! - crazyman 9/17/2008, 8:47 pm
Ideal Relic Hunting Coil?? - BamaBill 9/13/2008, 6:34 pm
- Re: Ideal Relic Hunting Coil?? - Carl 9/14/2008, 3:05 am
  - Re: Ideal Relic Hunting Coil?? - BamaBill 9/14/2008, 1:06 pm
Compass Coin Magnum batteries - BobD 9/12/2008, 9:02 pm
- Got a multi-meter ? Try old 9volts that read 6-7.5 Volts. - Sean 9/18/2008, 1:17 pm
- Re: Compass Coin Magnum batteries - PaulWv 9/13/2008, 7:30 am
Minelab's New ETrac w/ USB to PC - Sean 9/12/2008, 12:58 pm
- Re: Minelab's New ETrac w/ USB to PC - Bjorn 9/12/2008, 2:00 pm
  - Re: Minelab's New ETrac w/ USB to PC - rob farrer 9/16/2008, 3:45 pm
  - Re: Minelab's New ETrac w/ USB to PC - MANNIN 9/16/2008, 3:39 pm
    - Re: Minelab's New ETrac w/ USB to PC - Jessie Thompson 9/18/2008, 8:39 am
      - Re: Minelab's New ETrac w/ USB to PC - OzarkTom 9/18/2008, 11:46 pm
- RE: E-Trac. Sorry, I didn't scrool down far enought - Sean 9/12/2008, 1:04 pm
Pulse Devil is............dead/alive/in limbo? - BlazoBill 9/11/2008, 5:08 pm
- Re: Pulse Devil is............dead/alive/in limbo? - Steve Herschbach 9/12/2008, 12:37 pm
  - Re: Pulse Devil is............dead/alive/in limbo? - BlazoBill 9/12/2008, 6:30 pm
X-Terra 70 vs. LoboST? - Carl 9/10/2008, 12:51 am
- Re: X-Terra 70 vs. LoboST? - ROLIME 9/25/2008, 9:01 am
- Re: X-Terra 70 vs. LoboST? - Steve Herschbach 9/10/2008, 10:13 pm
Coil for MXT - BamaBill 9/7/2008, 4:05 pm
- Re: Coil for MXT - Monte 9/8/2008, 11:42 pm
  - Re: Coil for MXT - BamaBill 9/9/2008, 11:49 am
- Re: Coil for MXT - Reg 9/7/2008, 7:42 pm
whites search coil - crawford 9/7/2008, 10:46 am
- Re: whites search coil - ismail arslan 9/22/2008, 3:31 am
- Re: whites search coil - Terry R 9/10/2008, 10:01 am
C-Scope - Jerry 9/7/2008, 9:51 am
Something is bugging me Tom in Ca. - George Kinsey 9/5/2008, 6:51 pm
- Re: Something is bugging me Tom in Ca. - Tom_in_CA 9/5/2008, 8:57 pm
  - Re: Something is bugging me Tom in Ca. - George Kinsey 9/7/2008, 7:36 pm
  - Delay settings - Reg 9/5/2008, 10:39 pm
    - Re: Delay settings - Tom_in_CA 9/6/2008, 4:21 pm
      - Re: Delay settings - Reg 9/7/2008, 9:52 am
        
        Re: TDI manual - Reg 9/7/2008, 2:07 pm
Wireless headphones? - Carl 9/4/2008, 1:33 am
- Re: Wireless headphones? - metalfoot 9/5/2008, 9:46 am
- Re: Wireless headphones? - Bjorn 9/4/2008, 6:29 am
  - Re: Wireless headphones? - Jerry Ga. 9/4/2008, 9:17 pm
    - Re: Wireless headphones? - Brian 9/5/2008, 4:37 am
      - Re: Wireless headphones? - david jones 9/5/2008, 7:46 pm
        
        Re: Wireless headphones? - metalfoot 9/8/2008, 9:04 am
7.5 TDI coil... - Horsesoldier 9/2/2008, 1:32 pm
T2 coil - PaulWV 8/30/2008, 5:33 pm
- Re: review of similar coil - OzarkTom 9/1/2008, 1:22 am
  - Re: review of similar coil - Brian 9/1/2008, 4:29 am
White's TDI site - Horsesoldier 8/29/2008, 11:28 am
- Re: White's TDI site - Reg 8/29/2008, 10:16 pm
  - Re: White's TDI site - Carl-NC 8/30/2008, 1:31 am
    - Re: White's TDI site - Reg 8/30/2008, 11:27 am
  - Re: White's TDI site - RTP 8/30/2008, 1:16 am
    - Re: White's TDI site - Reg 8/30/2008, 10:45 am
- Re: White's TDI site - RTP 8/29/2008, 8:01 pm
An interesting depth test of the top detectors. - OzarkTom 8/28/2008, 10:18 pm
- Wonder if they have ground minerals? A 5900 with a 15" coil will eat that can up at 25" - Jerry Talley 8/31/2008, 8:01 pm
- Halo Effect - Arthur-Canada 8/29/2008, 5:33 pm
  - Re: Halo Effect - MarkL 8/30/2008, 3:55 pm
Minelab E TRAC - Bjorn 8/25/2008, 11:10 am
- Minelab E TRAC weight?? - Carl 8/29/2008, 7:45 pm
  - Ya know, they now make a hip mount kit. - Digitrich 8/31/2008, 1:31 am
  - Page 81 states the Detector weight is - Monte 8/30/2008, 7:37 am
    - that puts it over 5lbs with batteries, is the Explorer SE less/same/more? - Neil 9/13/2008, 8:52 pm
    - The grip - Bjorn 8/30/2008, 2:17 pm
- ETrac has a 32bit, 48MHz microprocessor, any one know what the processor is in the Ex SE? - Digitrich 8/29/2008, 3:38 am
  - Re: ETrac has a 32bit, 48MHz microprocessor, any one know what the processor is in the Ex SE? - Bjorn 8/29/2008, 10:12 am
    - Re: ETrac has a 32bit, 48MHz microprocessor, any one know what the processor is in the Ex SE? - Digitrich 8/31/2008, 1:29 am
- Re: Minelab E TRAC - goodmore 8/28/2008, 4:54 pm
- Re: Minelab E TRAC - Mark W 8/26/2008, 11:18 pm
  - It's nice to know that they are listening!!! :) n/t - Beachcomber 8/28/2008, 7:41 pm
- Re: Minelab E TRAC - Bjorn 8/26/2008, 6:17 pm
- Now that sounds very interesting. - Mike Hillis 8/26/2008, 10:42 am
  - Looks like I called it right. The E-Trac will cost you $1499 - Mike Hillis 8/27/2008, 12:02 am
    - Looks like a sweet machine - Mike Hillis 8/27/2008, 1:12 pm
      - Re: Looks like a sweet machine - Carl 8/27/2008, 8:22 pm
        
        Looks like they pulled the post - Mike Hillis 8/28/2008, 9:19 am
        
        Re: Looks like a sweet machine - Bjorn 8/28/2008, 5:29 am
        
        Re: Looks like a sweet machine - Bjorn 8/28/2008, 1:44 pm
    - Have you read the full product sheet - Mike Hillis 8/27/2008, 11:48 am
- Re: Minelab E TRAC - goodmore 8/26/2008, 5:50 am
- Another link to Minelab E TRAC - Hard Nosed Dave 8/26/2008, 4:57 am
- Guess we'll just have to wait a week to...... - Beachcomber 8/25/2008, 5:24 pm
- Re: Minelab E TRAC - PaulWv 8/25/2008, 12:15 pm
  - Re: Minelab E TRAC - Bjorn 8/25/2008, 1:28 pm
TDI learning curve - Reg 8/24/2008, 1:55 pm
- Re: TDI learning curve - Tom_in_CA 8/25/2008, 2:44 am
test - jackintexas 8/23/2008, 12:50 pm
- C+ on that test! - wade tx 8/23/2008, 10:13 pm
Another TDI video - Reg 8/23/2008, 7:37 am
- Single tone mode - Reg 8/24/2008, 6:52 pm
  - Re: Single tone mode - Tom_in_CA 8/25/2008, 2:33 am
    - Re: Single tone mode - Reg 8/25/2008, 9:30 am
      - Re: reply - Tom_in_CA 8/25/2008, 10:31 am
        
        Re: reply - Reg 8/25/2008, 11:59 am
        
        Re: reply - Tom_in_CA 8/25/2008, 2:49 pm
        
        Thanks Tom - Reg 8/25/2008, 4:20 pm
      - Re: Single tone mode - Poddar 8/25/2008, 10:26 am
- Re: Another TDI video - Tom_in_CA 8/24/2008, 1:41 am
  - Re: Question for Reg: - Tom_in_CA 8/24/2008, 11:24 am
    - Re: Answer for Tom - Reg 8/25/2008, 4:36 pm
    - Re: Question for Reg: - Reg 8/24/2008, 1:16 pm
      - Re: Question for Reg: - reply - Tom_in_CA 8/25/2008, 2:28 am
- Re: Another TDI video - Tom_in_CA 8/23/2008, 7:38 pm
  - Re: Another TDI video - George Kinsey 8/23/2008, 9:26 pm
- Re: Another TDI video - PhilNCbeach 8/23/2008, 8:32 am
  - Re: Another TDI video - Reg 8/23/2008, 11:41 am
    - Re: Another TDI video - poddar 8/23/2008, 7:16 pm
White's TDI Field Test... - jim straight 8/22/2008, 7:53 pm
How do they do that - PaulWV 8/22/2008, 11:16 am
- Re: How do they do that - bubba 8/22/2008, 4:07 pm
- Re: How do they do that - crazyman 8/22/2008, 11:43 am
  - Re: How do they do that - BlazoBill 8/22/2008, 2:44 pm
Red Heat.... - bubba 8/21/2008, 11:29 pm
- Re: Red Heat.... - Brian 8/22/2008, 3:51 am
  - Thanks Brian. Was hoping... - bubba 8/22/2008, 4:04 pm
    - Re: Thanks Brian. Was hoping... - Brian 8/24/2008, 6:41 am
    - Re: Thanks Brian. Was hoping... - Mrand 8/23/2008, 8:54 am
Golden Touch Gold Tester - Dave 8/21/2008, 2:00 pm
- Re: Golden Touch Gold Tester - eddiecurrent 8/21/2008, 9:43 pm
  - Re: Golden Touch Gold Tester - Brian 8/22/2008, 11:01 am
Metrotech 200 help - metalfoot 8/21/2008, 9:56 am
- Re: Metrotech 200 help - JB(MS) 8/21/2008, 3:22 pm
- Re: Metrotech 200 help - bubba 8/21/2008, 2:30 pm
Was Compass being back in... - bubba 8/20/2008, 4:24 pm
- Re: Was Compass being back in... - K. Wills 8/24/2008, 10:54 am
  - Re: Was Compass being back in... - jim straight 8/26/2008, 2:22 am
    - Re: Was Compass being back in... - K. Wills 9/7/2008, 10:02 am
      - Re: Was Compass being back in... - jim straight 9/16/2008, 12:45 am
- A post on the Geotech forums....... - JB(MS) 8/20/2008, 5:36 pm
  - Re: A post on the Geotech forums....... - JB(MS) 8/20/2008, 8:47 pm
    - Re: A post on the Geotech forums....... - OzarkTom 8/21/2008, 2:43 am
  - Thank you JB. Does this - bubba 8/20/2008, 6:20 pm
    - Re: Thank you JB. Does this - jim straight 8/21/2008, 7:45 pm
    - After the infamous FIRE..it was all crap they made.. - Scott Az. 8/20/2008, 6:50 pm
ok, TDI & Exp. field test youtube clip - Tom_in_CA 8/20/2008, 4:02 pm
- Good job - Rudy(CA) 8/23/2008, 12:37 am
- Good honest informative video... - Charles (Sabre)(Tx) 8/22/2008, 4:00 pm
- Wish I had high speed internet - PaulWV 8/21/2008, 7:43 pm
- Re: ok, TDI & Exp. field test youtube clip - Mike Hillis 8/21/2008, 1:46 pm
- Good Job Tom. Lets see some more! - Sean 8/21/2008, 8:06 am
- Thanks, That's a great clip. You've done well. - Hard Nosed Dave 8/21/2008, 5:30 am
- Re: ok, TDI & Exp. field test youtube clip - Carl-NC 8/21/2008, 2:17 am
- Re: ok, TDI & Exp. field test youtube clip - poddar 8/20/2008, 11:00 pm
- Nice Job!!!! - Beachcomber 8/20/2008, 10:12 pm
tech question ----- - clark 8/17/2008, 12:38 pm
- Nautilus depth - Jerry Talley 8/17/2008, 9:27 pm
  - Question for you Jerry... - bubba 8/18/2008, 6:50 pm
    - Meant to say... - bubba 8/18/2008, 7:00 pm
      - I seemed to get better depth and no quesiton it was smoother - Jerry Talley 8/18/2008, 10:05 pm
        
        That's been my experience. - bubba 8/19/2008, 12:30 am
        
        The early ones boards were layed out by hand, probably had better components, etc - Jerry Talley 8/19/2008, 5:38 pm
        
        Re: The early ones boards were layed out by hand, probably had better components, etc - bubba 8/20/2008, 12:26 am
  - Re: Nautilus depth - clark 8/17/2008, 9:44 pm
    - Re: Nautilus depth - crazyman 8/20/2008, 3:57 pm
- Re: tech question ----- - PaulWV 8/17/2008, 4:20 pm
Minelab Advantage - Jerry 8/16/2008, 5:12 pm
- ADVANTAGE---the name says it all.................... - Dig'n in Va. 8/19/2008, 11:13 pm
- Thanks Everyone, - Jerry 8/18/2008, 5:45 pm
  - Re: Thanks Everyone, - bubba 8/20/2008, 12:47 am
- Re: Minelab Advantage - crazyman 8/18/2008, 12:58 pm
  - Re: Minelab Advantage - john37115 8/19/2008, 2:22 pm
    - Re: Minelab Advantage - crazyman 8/20/2008, 3:13 pm
      - Re: Minelab Advantage - john37115 8/20/2008, 4:33 pm
        
        A question on the Colt? - crazyman 8/20/2008, 5:12 pm
        
        Re: A question on the Colt? - john37115 8/20/2008, 5:57 pm
        
        Thanks John! - crazyman 8/20/2008, 6:06 pm
    - Just because... - bubba 8/19/2008, 11:02 pm
      - Re: Just because... - john37115 8/20/2008, 12:15 pm
      - Bubba but you forgot....... - crazyman 8/20/2008, 4:13 am
        
        Re: Bubba but you forgot....... - bubba 8/20/2008, 3:59 pm
        
        Re: Bubba but you forgot....... - crazyman 8/20/2008, 4:18 pm
- Re: Minelab Advantage - bubba 8/17/2008, 9:07 pm
  - Re: Minelab Advantage - Brian 8/18/2008, 3:24 am
- Re: Minelab Advantage - john37115 8/16/2008, 8:09 pm
- Re: Minelab Advantage - FrankMD 8/16/2008, 5:32 pm
Tesoro Stingray - Carl 8/16/2008, 4:00 pm
- Re: Tesoro Stingray - Pete in MI 9/4/2008, 12:04 am
- Re: Tesoro Stingray - Dave 8/19/2008, 3:23 pm
- Re: Tesoro Stingray - Charles (Sabre)(Tx) 8/16/2008, 9:28 pm
  - Re: Tesoro Stingray - Brian 8/18/2008, 10:45 am
Field tested the TDI - Tom_in_CA 8/16/2008, 2:10 pm
- Re: Think opposites - George Kinsey 8/24/2008, 8:01 am
- Re: Question: - Tom_in_CA 8/16/2008, 5:28 pm
  - Re: Question: - Jed 8/21/2008, 12:19 am
- Re: Field tested the TDI - Carl 8/16/2008, 3:57 pm
  - Re: Field tested the TDI - Tom_in_CA 8/16/2008, 4:40 pm
    - Re: Field tested the TDI - poddar 8/18/2008, 8:44 pm
      - Re: Field tested the TDI - Tom_in_CA 8/18/2008, 10:56 pm
If anyone is looking there is a TDI on Ebay n/t - Beachcomber 8/15/2008, 11:32 pm
- Re: If anyone is looking there is a TDI on Ebay n/t - OzarkTom 8/17/2008, 9:08 pm
- Found TDI For Sale - Valley Hunter 8/16/2008, 2:59 pm
The New Ultimate Detector video! Buried quarter at 24 inches! - OzarkTom 8/10/2008, 9:16 pm
- Re: The New Ultimate Detector video! Buried quarter at 24 inches! - Steve Ireland 8/31/2008, 9:12 pm
- Re: The New Ultimate Detector video! Buried quarter at 24 inches! - gthunter 8/16/2008, 2:58 am
- Re: The New Ultimate Detector video! Buried quarter at 24 inches! - Ben 8/13/2008, 11:35 pm
- Re: The New Ultimate Detector video! Buried quarter at 24 inches! - Hard Nosed Dave 8/12/2008, 11:03 am
  - Re: The New Ultimate Detector video! Buried quarter at 24 inches! - John-Edmonton 8/12/2008, 12:23 pm
    - Re: The New Ultimate Detector video! Buried quarter at 24 inches! - Larry 8/14/2008, 4:49 am
      - Re: The New Ultimate Detector video! Buried quarter at 24 inches! - OzarkTom 8/14/2008, 1:04 pm
- Re: Haste makes waste! - OzarkTom 8/11/2008, 10:59 pm
- Re: The New Ultimate Detector video! Buried quarter at 24 inches! - Jerry 8/11/2008, 5:49 pm
  - Re: If the detector will sing.... - OzarkTom 8/11/2008, 11:02 pm
    - Re: If the detector will sing.... - Treasure Master 8/12/2008, 4:45 pm
      - Re: If the detector will sing.... - OzarkTom 8/12/2008, 4:57 pm
- Re: The New Ultimate Detector video! Buried quarter at 24 inches! - Carl 8/11/2008, 12:26 am
  - Re: I agree - Tom_in_CA 8/11/2008, 1:26 am
    - Re: That trash signal was part of the problem. - OzarkTom 8/11/2008, 5:02 am
      - Two problems........ - BlazoBill 8/11/2008, 6:48 pm
        
        Re: Two problems........ - OzarkTom 8/11/2008, 8:20 pm
I was told that........ - John N 8/9/2008, 9:54 pm
- That's A Tough Question To Answer - John-Edmonton 8/10/2008, 3:12 am
  - Re: That's A Tough Question To Answer - OzarkTom 8/10/2008, 1:25 pm
- Re: I was told that........ - Mark W 8/9/2008, 11:59 pm
  - Re: I was told that........ - Carl 8/10/2008, 12:40 am
    - Re: I was told that........ - OzarkTom 8/10/2008, 1:08 am
      - Hope you Guys... - Rich 8/11/2008, 6:29 pm
        
        Re: Hope you Guys... - jackintexas 8/15/2008, 2:28 pm

Page: 1 2 3 4

Post a Message