Metal Detecting Equipment

Metal Detecting Equipment
[ Post a Message | Old forum archive ]

Archives User comments and opinions are welcomed here. This site is not sponsored by any dealer or manufacturer of detecting equipment. Everyone is encouraged to speak out in a responsible manner expressing both good and bad experiences with any make, model or brand detector or accessory. Our mission is to increase the knowledge base of all readers by sharing our collective insight and to provide sound advice without editorial bias.

Page: 1 2 3

Hope you guys will give me a hand.......... - John N 4/10/2008, 3:03 pm
- I'll Take A Shot At It - John-Edmonton 4/10/2008, 7:29 pm
Does anyone have the Pulse Star 2 detector? - Digitrich 4/10/2008, 1:20 pm
- Re: Does anyone have the Pulse Star 2 detector? - Digitrich 4/18/2008, 3:16 pm
Which of the old Compass models... - Az. Scott 4/9/2008, 8:50 pm
- Re: Which of the old Compass models... - Paul (Ca) 4/9/2008, 9:37 pm
  - Re: Which of the old Compass models... - Scott Az. 4/10/2008, 11:15 am
    - Re: Which of the old Compass models... - Tom_in_CA 4/10/2008, 11:37 am
      - Re: Which of the old Compass models... - Paul (Ca) 4/12/2008, 10:08 am
        
        Re: Which of the old Compass models... - Tom_in_CA 4/13/2008, 7:05 pm
        
        Any chance for another shot on the spent bullet? - Paul (Ca) 4/14/2008, 8:52 am
        
        Re: thanx Paul - Tom_in_CA 4/14/2008, 1:29 pm
        
        Re: thanx Paul - Paul (Ca) 4/15/2008, 9:55 am
Minelab GPX-4500 Owner's Manual - Steve Herschbach 4/7/2008, 11:07 pm
- Re: Minelab GPX-4500 Owner's Manual - Carl 4/7/2008, 11:23 pm
  - Re: Minelab GPX-4500 Owner's Manual - Steve Herschbach 4/8/2008, 12:27 am
    - Re: Minelab GPX-4500 Owner's Manual - Tom_in_CA 4/8/2008, 3:11 am
      - Re: Minelab GPX-4500 Owner's Manual - Steve Herschbach 4/8/2008, 10:26 am
        
        Re: Minelab GPX-4500 Owner's Manual - Tom_in_CA 4/8/2008, 11:55 am
        
        Re: Minelab GPX-4500 Owner's Manual - Steve Herschbach 4/8/2008, 12:29 pm
Least expensive gold nugget detector - Steve Herschbach 4/7/2008, 1:53 am
- On frequency, this is what I have learned so far - Digitrich 4/9/2008, 12:43 pm
- Re: Least expensive gold nugget detector - Sean 4/8/2008, 4:24 pm
  - oops sorry I'm wrong - Sean 4/8/2008, 4:41 pm
- Re: Least expensive gold nugget detector - Daniel 4/7/2008, 5:37 am
Is anyone familar with the Deeptech Vista Detector - john37115 4/7/2008, 1:31 am
- Re: Is anyone familar with the Deeptech Vista Detector - john37115 4/9/2008, 10:14 am
  - Re:Video don't seem to work? - PaulWV 4/9/2008, 3:36 pm
    - Re:Video don't seem to work? - DeepTech 4/10/2008, 2:30 am
    - Re:Video don't seem to work? - john37115 4/10/2008, 12:13 am
- Do you have any links.... - Beachcomber 4/8/2008, 10:04 pm
  - Re: Do you have any links.... - Bob sw.mo 4/8/2008, 10:48 pm
- Re: Is anyone familar with the Deeptech Vista Detector - bubba... 4/7/2008, 5:12 pm
  - Re: Is anyone familar with the Deeptech Vista Detector - john37115 4/7/2008, 10:52 pm
3 New Teknetics detectors out in June........ - John N 4/6/2008, 9:54 pm
TDI testimonies+huge pile of CW relics - FrankMD 4/6/2008, 2:14 pm
- Steve, just curious, - FrankMD 4/7/2008, 9:56 am
  - Re: Steve, just curious, - Steve Herschbach 4/7/2008, 1:52 pm
    - Thanks Steve, and Steve, - FrankMD 4/8/2008, 7:54 am
- Re: TDI testimonies+huge pile of CW relics - Tom_in_CA 4/6/2008, 10:36 pm
- Re: TDI testimonies+huge pile of CW relics - RTP 4/6/2008, 3:11 pm
  - Re: TDI testimonies+huge pile of CW relics - Steve Herschbach 4/6/2008, 3:31 pm
    - Re: TDI testimonies+huge pile of CW relics - RTP 4/6/2008, 10:53 pm
      - First gold nugget with White's PI - Steve Herschbach 4/7/2008, 12:53 am
    - Re: TDI testimonies+huge pile of CW relics - FrankMD 4/6/2008, 4:58 pm
      - On the money Frank - Steve Herschbach 4/6/2008, 5:34 pm
Final thoughts and a few questions you should ask yourself before you purchase any new detector - George Kinsey 4/6/2008, 9:16 am
- Thanks George, everyone should read your post - Jerry Talley 4/6/2008, 9:33 am
  - Thanks Jerry . I will be sure to make the new Pulse available for you to use. - George Kinsey 4/6/2008, 10:27 am
New after market coils for some Minelabs and Whites - George Kinsey 4/6/2008, 8:51 am
- Re: New after market coils for some Minelabs and Whites - Digitrich 4/18/2008, 3:09 pm
White's Twin Domain Pulsemaster - FrankMD 4/5/2008, 9:55 pm
- I don't need superior depth..................... - John N 4/6/2008, 1:13 am
  - I do! - Steve Herschbach 4/6/2008, 2:54 pm
    - Pulse Devil/Nemsis - Beachcomber 4/7/2008, 6:58 am
      - Re: Pulse Devil/Nemesis - Steve Herschbach 4/7/2008, 10:36 pm
      - Pulse Devil Facts - Charles (Upstate NY) 4/7/2008, 8:27 am
        
        Re: Pulse Devil Facts - Digitrich 4/8/2008, 12:12 pm
        
        Re: Pulse Devil Facts - Steve Herschbach 4/8/2008, 3:18 pm
        
        Re: Pulse Devil Facts - Digitrich 4/9/2008, 12:48 pm
        
        Steve you got it all wrong buddy - Charles (Upstate NY) 4/8/2008, 10:29 pm
        
        Re: Steve you got it all wrong buddy - BlazoBill 4/9/2008, 7:45 am
        
        Excellent point Blazo - Charles (Upstate NY) 4/9/2008, 8:09 am
        
        Re: Steve you got it all wrong buddy - Steve Herschbach 4/9/2008, 2:03 am
        
        Re: rumor control - Carl 4/8/2008, 11:54 pm
        
        Re: rumor control - Charles (Upstate NY) 4/9/2008, 12:51 am
        
        Re: rumor control - Digitrich 4/9/2008, 1:12 pm
        
        Re: rumor control - Carl 4/9/2008, 7:15 pm
        
        Re: rumor control - Digitrich 4/10/2008, 3:59 am
        
        Re: rumor control - Carl 4/9/2008, 9:20 am
        
        Re: rumor control - Charles (Upstate NY) 4/9/2008, 8:32 pm
        
        Re: rumor control - joecoin 4/12/2008, 5:33 am
        
        Coil building - Charles (Upstate NY) 4/28/2008, 12:14 pm
        
        Frustrated! - Steve Herschbach 4/9/2008, 2:26 am
        
        Re: Frustrated! - Charles (Upstate NY) 4/9/2008, 8:40 am
        
        Re: rumor control - Steve(MS) 4/9/2008, 2:07 am
        
        Re: rumor control - Charles (Upstate NY) 4/9/2008, 8:23 am
        
        Re: Pulse Devil Facts Dave is headed in the right direction............. - John N 4/7/2008, 10:43 pm
    - Re: I do! - Carl 4/6/2008, 11:57 pm
    - Re: I do! - Bjorn 4/6/2008, 3:29 pm
      - Re: I do! - Tom_in_CA 4/6/2008, 10:45 pm
      - Re: I do! - Steve Herschbach 4/6/2008, 3:34 pm
  - Re: I don't need superior depth..................... - Tom_in_CA 4/6/2008, 9:54 am
  - Hold on there partner - Carl 4/6/2008, 8:27 am
    - Re: Hold on there partner - BlazoBill 4/6/2008, 12:02 pm
      - Re: Hold on there partner - Carl 4/6/2008, 1:05 pm
    - Carl.. I might add - FrankMD 4/6/2008, 8:59 am
- Re: White's Twin Domain Pulsemaster - Steve Herschbach 4/5/2008, 10:01 pm
  - Re: White's Twin Domain Pulsemaster - FrankMD 4/5/2008, 10:04 pm
    - Re: White's Twin Domain Pulsemaster - Steve Herschbach 4/6/2008, 1:26 pm
      - That makes sense Steve. N/T - FrankMD 4/6/2008, 2:11 pm
Got my GMT 1650 yesterday..and got it running today... - Az. Scott 4/5/2008, 9:52 pm
- Re: Got my GMT 1650 yesterday..and got it running today... - Paul (Ca) 4/5/2008, 11:15 pm
  - Here is a few pics...and... - Az. Scott 4/6/2008, 12:25 am
    - Re: Here is a few pics...and... - Paul (Ca) 4/6/2008, 9:29 am
      - Re: Here is a few pics...and... - Az. Scott 4/6/2008, 12:43 pm
        
        Re: Here is a few pics...and... - Paul (Ca) 4/6/2008, 11:33 pm
        
        Lets do it... - Az. Scott 4/7/2008, 12:18 am
Cool GS 5 Mod - Reg 4/5/2008, 5:27 pm
- That is cool!!! - G. Baker 4/5/2008, 7:49 pm
  - Re: That is cool!!! - Reg 4/5/2008, 8:05 pm
    - Re: That is cool!!! - G. Baker 4/6/2008, 8:02 am
- Re: Cool GS 5 Mod - Tom_in_CA 4/5/2008, 6:13 pm
  - Re: Cool GS 5 Mod - Reg 4/5/2008, 6:56 pm
Whites PI - George Kinsey 4/5/2008, 5:13 am
- Re: Whites PI - Steve Herschbach 4/5/2008, 8:31 pm
  - Re: Whites PI - George Kinsey 4/6/2008, 7:40 am
- Re: Whites PI - bubba... 4/5/2008, 5:37 pm
  - Re: Whites PI - George Kinsey 4/5/2008, 6:28 pm
    - Thanks George(NT). - bubba... 4/5/2008, 11:05 pm
- Re: Whites PI - Tom_in_CA 4/5/2008, 10:46 am
  - Re: Whites PI - George Kinsey 4/5/2008, 6:45 pm
What's MSRP on new Whites PI? - Carl 4/4/2008, 12:09 am
- Re: What's MSRP on new Whites PI? - Steve Herschbach 4/4/2008, 12:53 am
Bunch of pictures of White's PI Prototype - Steve Herschbach 4/3/2008, 6:34 pm
- Steve, a comment re: TDI vs MXT - FrankMD 4/4/2008, 10:04 am
  - Re: Steve, a comment re: TDI vs MXT - Steve Herschbach 4/4/2008, 10:27 am
    - Re: Steve, a comment re: TDI vs MXT - Carl 4/4/2008, 7:19 pm
      - Re: Steve, a comment re: TDI vs MXT - Steve Herschbach 4/4/2008, 11:35 pm
        
        Great Info - Bjorn 4/5/2008, 5:30 am
        
        Re: Steve, a comment re: TDI vs MXT - Carl 4/5/2008, 1:33 am
    - Re: Steve, a comment re: TDI vs MXT - Tom_in_CA 4/4/2008, 11:47 am
      - Re: GS 5 and iron - Reg 4/4/2008, 3:15 pm
        
        Re: GS 5 and iron - George Kinsey 4/5/2008, 5:06 am
        
        Re: GS 5 and iron - Reg 4/5/2008, 10:00 am
        
        Re: GS 5 and iron - Tom_in_CA 4/5/2008, 10:57 am
        
        Re: GS 5 and iron - Ralph 4/6/2008, 10:17 pm
        
        Re: yes but.... - Tom_in_CA 4/6/2008, 10:54 pm
        
        No can do what? - G. Baker 4/5/2008, 9:00 am
      - Re: Steve, a comment re: TDI vs MXT - Steve Herschbach 4/4/2008, 12:38 pm
        
        Perhaps....... - G. Baker 4/4/2008, 4:39 pm
- Can you answer any questions yet? - G. Baker 4/4/2008, 9:39 am
  - Re: Can you answer any questions yet? - Steve Herschbach 4/4/2008, 10:31 am
- Will this detector be the answer? - BlazoBill 4/3/2008, 9:59 pm
  - Re: Will this detector be the answer? - Ralph 4/3/2008, 10:18 pm
    - Ralph could you explain - FrankMD 4/4/2008, 8:42 am
      - Re: Ralph could you explain - Ralph 4/4/2008, 7:53 pm
        
        Thanks Ralph. N/T - FrankMD 4/4/2008, 9:27 pm
    - Then throw in a ground balance - Steve Herschbach 4/3/2008, 11:49 pm
      - Re: Then throw in a ground balance - Carl 4/4/2008, 12:05 am
        
        Pulse Delay - Steve Herschbach 4/4/2008, 12:36 am
  - Re: Will this detector be the answer? - Steve Herschbach 4/3/2008, 10:10 pm
- Re: Bunch of pictures of White's PI Prototype - Paul (Ca) 4/3/2008, 9:41 pm
  - White's PI Prototype in Hawaii - Steve Herschbach 4/3/2008, 9:55 pm
    - I guess no one noticed the coil ? - Rissa 4/6/2008, 1:50 pm
    - Pulse delay set at 10uS from the picture, - Paul (Ca) 4/3/2008, 10:15 pm
      - WATER PROOF VERSION ??? - Barry Leaver 4/4/2008, 1:44 pm
        
        Re: WATER PROOF VERSION ??? - Paul (Ca) 4/4/2008, 5:45 pm
      - In-line probe - Steve Herschbach 4/3/2008, 11:20 pm
Does anyone know who the chief designer of the ML Explorers is? - Digitrich 4/3/2008, 1:49 pm
- Anybody?????? - Digitrich 4/8/2008, 12:00 pm
  - Re: Anybody?????? - BlazoBill 4/8/2008, 6:51 pm
    - Re: Anybody?????? - Digitrich 4/9/2008, 1:27 pm
- Re: Does anyone know who the chief designer of the ML Explorers is? - FrankMD 4/3/2008, 9:38 pm
- Re: Does anyone know who the chief designer of the ML Explorers is? - Bjorn 4/3/2008, 2:11 pm
  - Re: Does anyone know who the chief designer of the ML Explorers is? - Digitrich 4/3/2008, 5:06 pm
Opinions on GOLD machines - Digitrich 4/3/2008, 1:01 pm
- Re: Opinions on GOLD machines - jim straight 4/3/2008, 8:13 pm
- Re: Opinions on GOLD machines - Steve Herschbach 4/3/2008, 6:27 pm
Recession and detector price ? - PaulWV 3/31/2008, 7:45 am
- Re: Recession and detector price ? - Digitrich 4/9/2008, 1:39 pm
- Detector Pricing - john 4/1/2008, 9:42 am
- It's better than ever...... - Andy,NM 4/1/2008, 8:44 am
- Re: Recession and detector price ? - john 4/1/2008, 12:37 am
  - Re: Recession and detector price ? - John Tomlinson,CET 4/6/2008, 6:17 pm
  - Re: Recession and detector price ? - Tom_in_CA 4/2/2008, 12:43 pm
    - Re: Recession and detector price ? - John 4/2/2008, 6:37 pm
      - Detector prices! - Ty 4/3/2008, 7:32 am
        
        Re: Detector prices! - John Tomlinson,CET 4/3/2008, 10:26 pm
        
        Re: Detector prices! - Tom_in_CA 4/3/2008, 11:16 am
        
        Re: Detector prices! - John 4/5/2008, 10:38 pm
        
        Re: Detector prices! - John Tomlinson,CET 4/6/2008, 7:13 am
- Re: Recession and detector price ? - John Tomlinson,CET 3/31/2008, 9:52 am
  - John... I tried to answer your question - jim straight 3/31/2008, 12:10 pm
    - Re: John... I tried to answer your question - John Tomlinson,CET 3/31/2008, 2:24 pm
      - Re: John... I tried to answer your question - jim straight 3/31/2008, 4:44 pm
        
        Re: John... I tried to answer your question - John Tomlinson,CET 3/31/2008, 10:42 pm
Photo of new Whites TDI Pulsescan - G. Baker 3/28/2008, 10:06 pm
- Re: Photo of new Whites TDI Pulsescan - George Kinsey 4/5/2008, 5:20 am
  - Re: Photo of new Whites TDI Pulsescan - Carl 4/5/2008, 8:57 am
    - Re:I was there - George Kinsey 4/5/2008, 6:35 pm
- Coin detectorists - Digitrich 3/31/2008, 12:25 am
  - Re: Coin detectorists - George Kinsey 4/5/2008, 6:50 pm
  - Re: Coin detectorists - Tom_in_CA 3/31/2008, 1:09 pm
    - Re: Coin detectorists - Digitrich 4/10/2008, 1:13 pm
- Re: Photo of new Whites TDI Pulsescan - Bjorn. 3/29/2008, 5:16 pm
- I assume TDI refers to Tone - BlazoBill 3/28/2008, 10:18 pm
  - That is a prototype - Steve Herschbach 3/28/2008, 10:25 pm
    - Pick a name - Reg 3/29/2008, 9:41 am
      - TDI stands for: - FrankMD 4/9/2008, 6:40 pm
      - Re: Pick a name - Steve Herschbach 3/29/2008, 11:34 am
    - What are the 3 lights on the lower left side? - G. Baker 3/28/2008, 11:00 pm
      - Re: What are the 3 lights on the lower left side? - Steve Herschbach 3/28/2008, 11:56 pm
        
        Thanks.!!! - G. Baker 3/30/2008, 11:35 am
    - Re: That is a prototype - BlazoBill 3/28/2008, 10:33 pm
      - Re: That is a prototype - Steve Herschbach 3/28/2008, 10:51 pm
        
        Steve, could you tell us - bubba 3/29/2008, 7:47 pm
        
        Re: Steve, could you tell us - Steve Herschbach 3/30/2008, 2:33 pm
        
        Thank you Steve. Your posts - bubba 3/31/2008, 6:58 pm
        
        Re: Steve, could you tell us - Carl 3/30/2008, 5:38 pm
        
        Re: Steve, could you tell us - Steve Herschbach 3/30/2008, 9:09 pm
        
        Hi Steve - Ralph 4/3/2008, 9:49 pm
        
        Re: Steve, could you tell us - Carl 3/31/2008, 12:46 am
        
        Re: Carl - Tom_in_CA 3/31/2008, 1:14 pm
        
        I'm bored silly with VLF units - Steve Herschbach 3/31/2008, 1:09 am
        
        Re: That is a prototype - Bjorn. 3/29/2008, 6:48 pm
Nemesis Here.... - PaulWV 3/28/2008, 7:06 am
- Re: Nemesis Here.... - Bjorn 3/28/2008, 4:26 pm
- the Nemesis appears to be designed as a - Tom NWMI 3/28/2008, 9:12 am
1.22 OUNCE GOLD NUGGET SHAPED LIKE A DOGGYS HEAD with exact location found + personal Gold Nugget CD - Lonny007 3/26/2008, 5:29 pm
Any one know the freq of an F2 fisher - Bob sw.mo 3/26/2008, 4:56 pm
- Re: Any one know the freq of an F2 fisher - Paul 3/27/2008, 11:35 am
  - Re: Any one know the freq of an F2 fisher - Daniel 4/2/2008, 11:00 am
Changing coil on CZ-20 - Barry Leaver 3/25/2008, 9:26 pm
- Carl One Follow up Question - Barry Leaver 3/29/2008, 7:40 am
- Re: Changing coil on CZ-20 - Carl-NC 3/25/2008, 10:24 pm
  - Re: Changing coil on CZ-20 - Barry Leaver 3/26/2008, 9:29 pm
entry level detector - tom in sv 3/23/2008, 9:10 pm
- Re: entry level detector - Daniel 3/25/2008, 12:09 am
- Re: entry level detector - BlazoBill 3/23/2008, 10:11 pm
  - Re: entry level detector - jackintexas 3/24/2008, 10:12 pm
Tekentics S/T with Fisher DD coil, - Paul (Ca) 3/23/2008, 12:35 am
- Re: Tekentics S/T with Fisher DD coil, - Daniel 3/25/2008, 12:51 am
  - Re: Tekentics S/T with Fisher DD coil, - Paul (Ca) 3/25/2008, 8:53 pm
What is the best target ID detector on the market today?????. - JOhn N 3/23/2008, 12:03 am
- Re: What is the best target ID detector on the market today?????. - Tom_in_CA 3/23/2008, 1:42 am
metal detector - tom 3/21/2008, 11:28 pm
- Re: metal detector - Tom_in_CA 3/22/2008, 12:26 am
  - Re: metal detector - Dana Point Val 3/28/2008, 12:31 pm
  - Re: metal detector - Wayne/TX 3/23/2008, 5:08 am
  - Re: metal detector - tom 3/22/2008, 12:29 pm
    - Re: metal detector - Wayne/TX 3/23/2008, 4:51 am
    - Re: metal detector - Paul (Ca) 3/22/2008, 8:25 pm
    - Re: metal detector - Tom_in_CA 3/22/2008, 6:28 pm
      - Re: metal detector - tom 3/23/2008, 2:42 pm
PI - iron mask and "orphan" silver - lytle78 3/21/2008, 3:06 am
- How to test iron masking! - Mark L 3/22/2008, 9:45 am
  - Re: How to test iron masking! - Bjorn 3/22/2008, 12:27 pm
    - Re: depends - Tom_in_CA 3/23/2008, 8:47 am
- Shallow - not deep - lytle78 3/22/2008, 12:04 am
  - TID will be important - G. Baker 3/22/2008, 11:56 am
    - Re: TID will be important - Reg 3/22/2008, 3:35 pm
      - Re: TID will be important - G. Baker 3/22/2008, 9:13 pm
    - What is up with that? - Steve Herschbach 3/22/2008, 1:40 pm
      - Re: What is up with that? - Bjorn 3/22/2008, 1:53 pm
        
        Pulse Induction Full Target Discrimination - Steve Herschbach 3/22/2008, 3:09 pm
        
        Here is another one - G. Baker 3/22/2008, 9:29 pm
        
        Re: Here is another one - Tom_in_CA 3/23/2008, 1:39 am
        
        Re: Pulse Induction Full Target Discrimination - Bjorn 3/22/2008, 3:27 pm
    - Re: TID will be important - Bjorn 3/22/2008, 12:15 pm
      - Re: TID will be important - Tom_in_CA 3/22/2008, 6:39 pm
      - Re: TID will be important - G. Baker 3/22/2008, 1:12 pm
  - Re: Shallow - not deep - Bjorn 3/22/2008, 6:24 am
    - Re: Shallow - not deep - Tom NW MI 3/22/2008, 7:53 am
      - Re: Shallow - not deep - Bjorn 3/22/2008, 8:32 am
        
        Re: Shallow - not deep - Tom NW MI 3/22/2008, 9:26 am
        
        Re: Shallow - not deep - Bjorn 3/22/2008, 12:24 pm
- Re: PI - iron mask and "orphan" silver - Tom_in_CA 3/21/2008, 6:05 pm
- Re: PI - iron mask and "orphan" silver - Sean 3/21/2008, 5:00 pm
- Re: PI - iron mask and "orphan" silver - Carl 3/21/2008, 10:16 am
- Re: PI - iron mask and "orphan" silver - Bjorn 3/21/2008, 8:45 am
  - Re: PI - iron mask and "orphan" silver - Wayne/TX 3/23/2008, 5:25 am
Just pciked up a GMT 1650 in nice shape... - Az. Scott 3/19/2008, 8:02 pm
- Re: Just pciked up a GMT 1650 in nice shape... - JB(MS) 3/19/2008, 9:07 pm
  - It was on my wish list of classic iron hogs... - Az. Scott 3/19/2008, 9:25 pm
Excalibur II - Carl 3/18/2008, 7:57 pm
- Re: Excalibur II - Digitrich 4/3/2008, 1:13 pm
- Re: Excalibur II - Frank in NH 3/19/2008, 10:26 am
  - I think the early ones were not built by Minelab but by... - Scott Az. 3/19/2008, 2:00 pm
    - First ones built by Gary Storm of Detector Pro! - Mark L 3/19/2008, 3:19 pm
      - Thats what i thought but was not sure - Az. Scott 3/19/2008, 7:51 pm
- Re: Excalibur II - Daniel 3/18/2008, 11:40 pm
Reg's testing of different gold detectors - G. Baker 3/17/2008, 11:19 pm
- How did Dave..... - Beachcomber 3/23/2008, 10:37 am
- Re: thanx - Tom_in_CA 3/18/2008, 2:41 pm
  - Re: thanx - Reg 3/18/2008, 7:22 pm
    - Re: reply - Tom_in_CA 3/18/2008, 9:20 pm
      - Re: reply - Reg 3/19/2008, 7:46 pm
      - Re: reply - Reg 3/18/2008, 11:42 pm
        
        Re: reply - Tom_in_CA 3/19/2008, 3:47 pm
        
        Re: reply - Reg 3/19/2008, 5:23 pm
        
        Re: Thanx! great post! N/T - Tom_in_CA 3/20/2008, 10:31 am
        
        Re: N - lytle78 3/20/2008, 2:11 am
        
        Re: N - Reg 3/20/2008, 9:33 am
        
        Re: postscrip - Tom_in_CA 3/19/2008, 3:59 pm
        
        Re: postscrip - Reg 3/19/2008, 5:32 pm
Minelab Musketeer Advantage, Sovereign, or Explorer??? - Joe(TX) 3/17/2008, 1:37 pm
- Re: Minelab Musketeer Advantage, Sovereign, or Explorer??? - Digitrich 4/3/2008, 1:26 pm
- Re: Minelab Musketeer Advantage, Sovereign, or Explorer??? - Dig'n in Va. 3/19/2008, 12:44 am
- Re: Minelab Musketeer Advantage, Sovereign, or Explorer??? - John Tomlinson,CET 3/18/2008, 8:36 am
  - JOHN......You only commented about the Musketeer ........... - Joe(TX) 3/18/2008, 7:49 pm
goldscanner - kamal 3/16/2008, 3:34 am
Tek 8000 Manual - Jeff (NY) 3/15/2008, 6:23 pm
- Re: Tek 8000 Manual - Wayne/TX 3/16/2008, 4:03 am
  - Re: Tek 8000 Manual - Jeff (NY) 3/16/2008, 2:05 pm
Fishers F5 Manual - PaulWV 3/15/2008, 11:16 am
- guess the F5 didnt work out - PaulWV 3/16/2008, 8:52 pm
  - Yep, after what Scott's been through with FT, they should be buying him pellet food.:)n/t - BlazoBill 3/16/2008, 9:38 pm
    - Yah...it started out good...but quickly ended in misery... - Az. Scott 3/17/2008, 9:59 pm
      - This recent "Tech Support" reply was a corker! - BlazoBill 3/19/2008, 8:19 am
        
        Their tech support was worthless the last two times I called.. - Az. Scott 3/19/2008, 9:46 am
    - Here's The Link To His Hunt.... - John-Edmonton 3/16/2008, 11:44 pm
      - A real shame. - Mike Hillis 3/17/2008, 5:14 pm
      - Fisher is gone. You are buying Bounty Hunters. - Steve Herschbach 3/17/2008, 12:16 am
A couple of Teks for sale - MI(Iowa) 3/15/2008, 9:37 am
- Re: A couple of Teks for sale - Edward Lopez 3/26/2008, 9:29 pm
old one for sale - pinebarrens1 3/14/2008, 10:09 pm
- Re: old one for sale - Tom_in_CA 3/14/2008, 11:15 pm
Question on the GPX-4000 - Tom_in_CA 3/13/2008, 10:06 am
- Re: Question on the GPX-4000 - G. Baker 3/14/2008, 8:39 am
  - How do you do that? - Steve Herschbach 3/14/2008, 12:52 pm
    - Re: How do you do that? - G. Baker 3/14/2008, 1:48 pm
      - Re: How do you do that? - Digitrich 4/3/2008, 1:33 pm
      - Thanks George! - Steve Herschbach 3/15/2008, 8:05 pm
  - Re: reply - Tom_in_CA 3/14/2008, 12:04 pm
    - Re: reply - Reg 3/15/2008, 10:38 pm
      - Re: reply - Reg 3/16/2008, 4:04 pm
        
        WOW - G. Baker 3/17/2008, 7:45 pm
    - Re: reply - G. Baker 3/14/2008, 1:24 pm
      - Re: reply - Tom_in_CA 3/14/2008, 4:56 pm
        
        Re: reply - G. Baker 3/14/2008, 6:09 pm
        
        Re: silver modification - Tom_in_CA 3/14/2008, 6:47 pm
        
        Re: silver modification - Carl 3/15/2008, 6:41 am
        
        Bingo! - Steve Herschbach 3/15/2008, 2:50 pm
        
        Re: been done - Tom_in_CA 3/15/2008, 11:02 am
- Re: just did some sleuthing.... - Tom_in_CA 3/13/2008, 12:16 pm
Whites two longterm R&D projects - FrankMD 3/12/2008, 9:01 pm
- Re: Whites two longterm R&D projects - Bob sw.mo 3/13/2008, 4:48 am
  - Longterm? - Bjorn 3/13/2008, 7:33 am
    - Re: Longterm? - FrankMD 3/13/2008, 7:22 pm
Is George Payne OK? - FrankMD 3/12/2008, 8:19 pm
- Re: Is George Payne OK? - George Payne 3/12/2008, 9:06 pm
  - Re: Is George Payne OK? - FrankMD 3/12/2008, 9:09 pm
Garrett Is Going To Be On The Discovery Channel - John-Edmonton 3/12/2008, 7:46 pm
Seben extreme - christophe 3/9/2008, 3:04 pm
- Re: Seben extreme - John - Edmonton 3/10/2008, 5:15 pm
  - Re: Seben extreme - John N 3/11/2008, 8:45 pm
Best Turf Plugging Tool - Steve Herschbach 3/8/2008, 7:30 pm
- Re: Best Turf Plugging Tool - Bjorn 3/9/2008, 9:23 am
- Re: Best Turf Plugging Tool - Carl 3/8/2008, 10:54 pm
  - Re: Best Turf Plugging Tool - Wayne/TX 3/9/2008, 5:52 am
New GPX4500? - G. Baker 3/8/2008, 4:25 pm
- Re: New GPX4500? - Tom_in_CA 3/8/2008, 6:54 pm
  - Re: New GPX4500? - Steve Herschbach 3/8/2008, 7:25 pm
    - Re: New GPX4500? - John Tomlinson,CET 3/8/2008, 7:40 pm
      - Re: New GPX4500? - Steve Herschbach 3/8/2008, 8:51 pm
        
        Re: New GPX4500? - John Tomlinson,CET 3/8/2008, 10:27 pm
        
        Re: New GPX4500? - Tom_in_CA 3/9/2008, 9:42 pm
        
        Re: New GPX4500? - Steve Herschbach 3/10/2008, 12:23 am
        
        Re: New GPX4500? - Tom_in_CA 3/10/2008, 12:03 pm
Compass 77B Pro kit - Tom(AZ) 3/4/2008, 11:00 pm
- Re: Compass 77B Pro kit - Daniel 3/4/2008, 11:33 pm
  - This one is in a green case - Tom(AZ) 3/5/2008, 7:30 am
    - Hey Tom...... - Az. Scott 3/5/2008, 8:17 pm
      - Scott, I will e-mail you - Tom(AZ) 3/5/2008, 8:35 pm
        
        Re: Scott, I will e-mail you - Az. Scott 3/5/2008, 9:08 pm
    - COMPASS 77B HAD 2 MODELS!! - Joe(TX) 3/5/2008, 8:15 pm
      - Re: COMPASS 77B HAD 2 MODELS!! - Daniel 3/6/2008, 3:00 pm
Picture of New White's PI Detector - Steve Herschbach 3/4/2008, 8:10 pm
- By the size of that nugget looks like it would do well on gold rings. - Frank in NH 3/5/2008, 4:33 pm
  - Re: By the size of that nugget looks like it would do well on gold rings. - Steve Herschbach 3/5/2008, 8:17 pm
C-Scope Detectors - John-Edmonton 3/3/2008, 8:34 am
- Have never used one - Kevin 3/4/2008, 12:55 am
  - Re: Have never used one - Thank you for the great pictures, and - - terry B WA 3/5/2008, 11:45 am
  - Re: Have never used one - Carl 3/4/2008, 10:31 am
  - Re: Have never used one - Steve Herschbach 3/4/2008, 3:02 am
- Aha...I knew it! - scott-devon 3/3/2008, 6:54 pm
  - Re: Aha...I knew it! - John-Edmonton 3/4/2008, 3:08 am
    - Re: Aha...I knew it! - Brian 3/4/2008, 4:37 am
      - Thanks Brian..... - John-Edmonton 3/4/2008, 10:52 am
        
        Re: Thanks Brian..... - Brian 3/4/2008, 11:01 am
Price of gold going up. - Carl 3/2/2008, 7:41 pm
- Re: Price of gold going up. - scott-devon 3/4/2008, 6:58 pm
- Re: Price of gold going up. - jim straight 3/3/2008, 4:06 am
  - Re: Price of gold going up. - Carl 3/4/2008, 10:28 am
  - Re: Price of gold going up. - Rick, N. MI 3/3/2008, 7:20 pm
  - Re: Price of gold going up. - stan 3/3/2008, 9:13 am
    - Re: Price of gold going up. - jim straight 3/3/2008, 11:55 pm
- Re: Price of gold going up. - Paul (Ca) 3/3/2008, 12:31 am
- Re: Price of gold going up. - JB(MS) 3/2/2008, 10:14 pm
  - Re: Price of gold going up. - Carl 3/2/2008, 11:31 pm
    - Re: Price of gold going up. - JB(MS) 3/3/2008, 2:07 pm
Nexus Metal Detectors new product line... - bubba 3/1/2008, 6:27 pm
- Re: Nexus Metal Detectors new product line... - George Kinsey 3/1/2008, 7:37 pm

Page: 1 2 3

Post a Message