Posted by Beachcomber on 7/17/2008, 9:56 pm
151.204.204.32
so far or not fully explained unless I missed it. Some posts have hinted at it but none have come out and said it. But it is possible with the TDI to have iron give either a Low Tone, a High Tone or a broken hi/lo tone. In other words if you are searching for Low Conductors and you are in a location where you don't need to use the GB Control for Mineral Compensation you can use it to adjust the iron rejection to cause most iron to give a Low Tone and if you are hunting for Coins which give a Low Tone you can use the GB Control to cause most iron to give a High Tone. You can also set the GB at the break point where most iron will give a broken hi/lo tone. Just something I thought should be mentioned as it makes the detector even more versatile. JMHO
HH
Beachcomber
Responses: