Posted by Andy,NM
on 7/15/2009, 7:42 am, in reply to "Technetics T2 vs. Fisher F75"
77.25.143.161
I'm a dealer for Teknetics, Fisher and C.Scope Detectors in Germany. Just want you guys to know what my agenda is...
Here is what the F75 has over the T2
Backlight
The always on backlight is liked by some users but disliked by others. I hunt by tone ID, so having no backlight on the T2 is not a problem. Some wish they could turn off the light of the F75.
First T2s didn't ID as deep as the F75, but the newer T2s ID as well as the F75.
The F75 Handles interference a little better, but i feel that the T2 has a little more punch if you can run ist hot.
The F75 has selectable processing modes that are independant from the Tone ID the T2s processing mode is tied to the tone ID.
The gain and depth on the T2 depends on the Disc setting. It seems you have high gain from 0 to 10, lower from 10 to 20 and higher from 20 + again. I like to use disc 0 with 2+ Tones
Depth on the fly meter on the F75 and signal strength on the T2.
Static All Metal Mode on the F75, not on the T2.
Last setting memory on the F75, not on T2.
First I thought ist is better to have last setting memory, but due to notch and disc setup on the F75 you may get confused what you did to the detector and a program error is still there if you turn is on again. On the other hand, programming the 3 settings on the T2 is done is under 10 seconds.
The F75 has only 15 numbers for iron and the T2 40 numbers for the iron range. If you have good target mixed in with iron the T2 does a better job than the F75.
The T2 has less feature, but is easier to use and setup. I year ago I thought the F75 is best for me, but now I use the T2 with the new 5" DD coil most of the time.
Hope that helps and feel free to ask.
Andy,NM
Responses: