Posted by Kenny
![]()
on 6/29/2009, 3:08 pm
97.97.59.1
I have an 89 mustang GT and a 2005 Emerson 18 x 7 ft flat deck car trailor that I unfortunately have to let go. Financial problems force sale. Here is what I ve got:
Car: 1989 Mustang GT ( factory 5 spd, and sunroof
car )
Suspenion: UPR chromoly tubular K-member
UPR chromoly tubular A-arms
UPR chromoly adjustable Lower Control
Arms
UPR coilovers
UPR Bump-steer kit
UPR Bump-steer install kit
UPR Cast/Camber Plates
UPR panhard bar/ anti-roll bar
UPR bushing kit to go with front
suspension
QA1 14-130 front springs
Engine: Stock forged bottom end 302 with new
piston rings, main bearings and rod
bearings. Fresh cleaned and honed.
melling HV oil pump.
stock pan.
Heads are stock 302 heads from 1978 I
think, they have nice small combustion
chambers, with 1.94 big valves and
1.60 small valves, with double valve
springs and 1.6 roller rockers. Heads
are clean.
Weiand X-Celerator intake manifold
with a 1 inch spacer
MSD Probillet Distributor ( needs
cap and rotor )
MSD Blaster 2 coil
Exhaust: Long Tube Ceramic Coated Headers and
a BBK offroad H-Pipe ( the short one)
To Finish: you will need a carb, cam and lifters
of your choice.
Trans: C-4 with a shift kit
Rear End: stock, 8.8 with a 273 gear.
Interior: all out of the car right now because
I was getting ready for a cage, but
have all peices and the 2 front gray
tweed seats. all panels and dash are
dyed in black and look very nice.
also have new door and hatch weather
stripping moldings.
Steering: Grant Steering wheel
Flaming River Manual Rack 15.1 ratio
Brakes: Manual conversion master cylinder, and
firewall bracket
stock disc fronts and drums in good
shape.
Exterior: Stock Gt body kit with mach 1 hood
and it comes with an lx wing along
with the gt wing.
Paint: car is all sanded down with primer
patches but all in all ready for
whatever design you come up with.
Wheels/Tires:
Weld draglites 15x3.5 fronts with bald
mickey tompson tires and the rears
are 15x8 with good falken ziex 215 65
15s
also comes with 2 sliver 16 inch
Cobra R s with worn down bfg tires
Thats a pretty great parts list I have to let go,
(yes its painful) but for everything including the car trailor I am asking $3800.00 obo Please make an offer the faster this goes the less it will hurt. Thanks. Call 727 433 4431 ask for Kenny.
Message Thread:
![]()
« Back to thread
If you're not going fast..you can't be happy!