Re: NSU Supermax based parade racer
Posted by JERRY on November 22, 2017, 10:54 am, in reply to "Re: NSU Supermax based parade racer"
Ok. All 4 strokes to have belly pans, all oil filler and drain plugs to be drilled and lockwired plus any cartridge style external oil filters to be lock wired using a jubilee clip clamped around the outside. A sharks fin must be fitted at the point on the swing are where the bottom of the rear sprocket and chain meet. All breathers must have a catch tank. Exhaust noise must not exceed 105Db at a given rpm depending on stroke engine. Monza filler caps must be modified by blocking the internal breather hole and a external breather fiited with a non retun valve or a couple of loops of clear pipe going into a 250ml bottle. Cap must also be locked shut using a Rclip or lock wire.If racing or parading with CRMC bikes must have eligibility certificate. All forms to do this are on the CRMC website. I am the parade rep for the club so all my contact details are on the web page or just pm me from here if anyone needs more information.
The oldest rocker in town!
Thank you for your support...