Posted by shiner
on July 27, 2018, 10:09 am, in reply to "Re: Useful
I have recently brought two old wooden handled carpenters screw drivers that had been used to stir paint etc for years ,removed the paint & sanded the handles cut the long blade off just where they flared out to flats near the handles .drilled a suitable hole central in the flat then hacksawed down to the hole with two cuts&finally filed the ends to a thinner blade to suit clutch screws coat of buttonpolish to seal handle result two quality job specific tools total cost £1.00,presented my pal with one he now hangs on his workshop wall, given that its bright and shiney and its a commercial premises he gets lots of cor where'd you get that Mr. it takes longer to tell than do! & the satisfaction of a job welldone is priceless
Thank you for your support...