[ Post a Response | FretlessBass.com Message Board ]
Posted by Jens Zastrow on 1/14/2006, 6:55 pm, in reply to "Re: fretless set up help needed" --Previous Message--
69.40.30.4
When you did the refurb did you loosen the truss rod and check that your neck is still true and not warped? Did you touch up the fretboard surface with a sanding block/beam? Press your G string (the one on the bass) down simultaneously around where the 1st and 19th frets would be... is there a very slight gap between fretboard and string along the entire length... no fretboard high spots? Now do the same for the E string and see if it's the same. There should be a very slight but perceptable gap on both strings if your truss rod is set correctly and your neck is true.
: hey yeah the nut hole is still quite about the
: fingerboard. the string dosent buzz the
: whole legnth of the string jsut around where
: the 9th fret would be to say like the 19th
: fret or so. i cranked up the bridge on it to
: get the string as high as possible and it
: still does it
:
:
Message Thread:
« Back to thread