[ Post a Response | FretlessBass.com Message Board ]
Posted by gale barchus on 3/28/2006, 10:03 am, in reply to "Jaco" --Previous Message--
210.146.149.186
I recently tried a Fender Custom Shop fretless '64 Jazz bass with an epoxy coated neck and Rotosound strings AND a Fender Signature Series Jaco bass with Fender flatwounds with an uncoated Pau Ferro fingerboard. The CS '64 sounded much more like Jaco that the Signature Series. I think it was the round wound srings and the epoxy coated neck.
: I'm trying to got closer to a Jaco sound..
:
: I have a relatively new jazz bass and put on
: a warwick fretless neck. Did Jaco use round
: wounds? I'm finding with flats that there
: are so many bad strings out there.
:
: I'm EQing a hartke HA7000 knocking out the
: bottom strongly at about 125 and then coming
: up strongly to 2K, using mostly the bridge
: pickup with a little from the neck pickup,
: and adding just a little tone until it's
: just fully bright.
:
: I know he used a chorus but I'm just trying
: to get reasonably close in tone to his basic
: sound.
:
: Any help would be greatly appreciated.
:
: I have a 66 jazz bass that I could put the
: fretless neck on but I hesitate to put on
: and take off necks, and I should be able to
: get it in the ballpark with the new one.
:
: I know hartke's are tough to work with..
: They are cheap though.
:
: I'm also working with B-E-A-D, the bass is
: tweaked well, intonation is perfect, the
: neck is perfect - nice envelope sound on the
: whole neck.
:
: Thanks for any help.
:
: Mike
:
Message Thread:
