Kalmatron® KF-C 'HOT PATCH,' THIS HANDMADE SEAL WAS CREATED USING THE KF-C COMPOUND AND STOPPED A WATER LEAK IMMEDIATELY, DRYING WITHIN 30 SECONDS
Plugging of pointed leakages by superficial plug materials is effective for non corrosive environments and stable ambient temperatures.
When it comes to the linear leakages, then the best product and method is the powdered plug that hardening in a contact with water or any other liquid even with pH<3.
Kalmatron® KF-C info with the link
Since thickness of the coat is not uniformed some places have had spotty leakages of crude oil. A patch of KALMATRON® KF-C stops an oil leak on the ceiling in a one step application.
Inline image 1
Hand made "Hot Patch" from KALMATRON® KF-C stops a Hand made "Hot Patch" from KALMATRON® KF-C stops a pressured leak in 30 sec.
CLASS UPGRADING CEMENT ADMIXTURE for activation of unhydrated cement grains by premix of 1 Lb of KC per 94 Lbs of cement or 10Kg of KC per 1m.ton of cement. Increases SS up to 3 times. Ordinary Cement with KC is applicable as a micro cement.
KF-C. PLUG + WELD ... Applicable by brush, spray or trowel at 2.0 Kg/m2.
An installer measures the mil thickness of a polyurethane coating on a concrete deck in an Ottawa, Ontario, parking garage.
This is a temporary solutions created by such as mono, poly, oily, Methyl Methacrylate (MMA), epoxy, bitumen, Elastometric Coating etc. based coatings even with premix of Fluorocarbon Based Polymer. With changing of ambient temperature, humid and direction of hydraulic pressure they loosing bond with supposed to be protected structure, cracking and blistering.
The “WELDING OF CONCRETE” is the fastest and most reliable concrete repair technology provided by KALMATRON® KF-C product for stopping of the leaks, filling up the thin-hair shrinkage cracks, finishing seams, etc., which are unapproachable by other known technologies.
On "e" shown glassy solid patch of KF-C strewed into the active leakage. On "f" is the same part of the cave "a" after concrete welding.
That technology of concrete repair doesn't need curing or later attention.
Whitening of concrete around KF-C patches is a vivid example of drying area stopped water absorption.
water resistance and
The “WELDING OF CONCRETE” is the fastest and most reliable concrete repair technology provided by KALMATRON® KF-F and KF-C products for stopping leaks, filling up hair thin shrinkage cracks, finishing seams, etc., which are unapproachable by other known technologies.
Kalmatron® Kf-C is the fastest hardening plug compound in the KALMATRON family for stopping pressured leaks in concrete, wooden, and masonry structures. KF-C plugs leaks with pressures up to 19 Bar. It is applicable in underwater conditions by using hardened KF-C plugs or by pressure strewing the KF-C powder itself by compressor. KF-C uses a similar formula to that of KF-A and KF-B, but has been refined for use in situations that require fast-drying concrete to quickly seal a leak before applying the final application.
• One time application of KF-C plug with KF-B finishing layer stops leaks indefinitely;
• Dries faster than regular quick-fixing plugs and patches.
• Can be used in wet or damp conditions, even underwater;
• Pressure strewing of KF-C powder stops a leak in 30 seconds;
• Ideal to keep on hand for immediate use on unsealed and unprotected concrete, wood, and masonry structures in case of leaks; and
• It is not a ‘Band-Aid’ solution because the plug is cementitious and is not rejected naturally by concrete, instead the plug moulds to the crack and upgrades its surroundings.
Simplicity and effectiveness of KALMATRON® KF-C application for stopping of leakages through masonry, concrete, grout and even soil consolidated structures became an opportunity for hundreds of small businesses to provide outstanding service to the industry and own community.
Do not hesitate to ask about sample for your trials even on a job site.
The simplicity of technology combined with the powerful KALMATRON® products is a guarantee for high quality concrete repair jobs.
This technology brings a new economical concept, where KALMATRON® reduces the cost per square foot of concrete up to 2 times. Our clients say:
not afford to work without KALMATRON®.”
The most economical on The World Market.
Mr. Dilip Shah/Ms. Helen A. Rusinoff
NRD Industries. USA
E-mail : firstname.lastname@example.org
WhatsApp : 0018483911248
Viber & Tango : 0018483911248 - Free calls Worldwide
Skype ID: dilipshah26
Some examples of applications are published on KALMATRON®GALLERY: