[ Post a Response | North East Street Car Association Forum ]
Please keep messages motorsports focused. I will delete ALL trash and propster posts so don't bother posting if you are looking to badmouth someone.
Posted by JOHN on 2/5/2009, 3:09 am
97.97.39.186
THIS ENGINE IS BRAND NEW AND HAS ONLY DYNO TIME ONLY 6 PULLS AND IS RECORDED ON VIDEO WHILE RUNNING ON LAWRENCES DYNO COLA 4340S SERIES CRANK,LIGHT WEIGHT INT BALANCEDBRAND NEW 6"ATI DAMPER/MSD BILLET DISTRIBUTOR 4 BOLT BLOCK NEVER BEEN HURT BRAND NEW EAGLE 6"RODS W/T 7/16 BOLTS JE 13.1 DOME PISTONS OK FOR 300 SHOT OF NITROUS,BRAND NEW JE RINGS BRODIX HEADS FULLY PORTED WITH FRESH VALVE JOB 3ANGLE 2.100"INT 1.625"EXH MANLEY PACOLOY SPRINGS TITANIUM RETAINERS 350LBS ON THE SEAT MAYBE 20 RUNS IF THAT COMP LIFTERS/MANLEY PUSH RODS(NEW) BRANDNEW,SCORPIAN 7/16" ROLLER ROCKERS 1.65 RATIO 750 LIFT CAMMOTION ROLLER CAM 278* DURATION W/T NEW CAM BRGS AND ROLLER TIMING CHAIN TORRINGTON ROLLER STYLE,ALONG W/T FRESH HONE W/T PLATE,MOROSO PRO ELIMINATOR ALUMINUM COMP ELIMINATOR BOXSTYLE OIL PAN,NEW OIL PUMP,EDELBROCK SUPERVICTOR INTAKE DOMINATOR FLANGE,FABRICATED SHEETMETAL ALUMINUM BILLET RAIL VALVE COVERS HAVE BUILD SHEET FOR SPECS THIS ENGINE WILL PUT A 3000LB CAR IN THE 9S NO PROBLEM AND DONT LIKE TO BE TURNED PAST 7800 TO 8000RPM SO SAIL THRU TRAPS AT 8000RPM ANY WAY ITS TAKEN UP SPACE IN THE GARAGE WILL TRADE FOR A A1 PRO TRANS 3 SPEED,THANK YOU MAKE OFFER
Message Thread:
« Back to thread
Please remember to support businesses that support motorsports
