Posted by L.A.B. on 4/28/2008, 9:12 pm, in reply to "Re: T140 clutch basket wobble"
86.16.234.150
<<it is possible to remove the clutch drum without disturbing the alternater assembly,slacken off the primary chain tensioner and once the shock absorber centre has been removed using a small magnet ,remove the 20 rollers,let the drum fall slightly towards you and lift off the chain towards the back of the drum,>>
I certainly would not have been able to do it that way on my own T140.
As the centre was a tight fit on the hub splines (as I believe it should be?) I was only able to separate them using a draw bolt and spacers once the clutch assembly had been removed, and then had to repeat the process the opposite way to reassemble it before refitting.
Message Thread:
« Back to thread