Shropshire Classic Motorcycles for all T140 sparesFrame and cycle parts ,Frame and cycle parts Page 2,Electrical ,Engine parts ,Clutch,Gearbox,Carburetter,Stickers,Tools, Extras,Front Forks,Brake parts,Engine parts

EBC BRAKE PADS 10% discount to Notice Board users this week!

Re: Trying to get my Bonnie to start & run at low revs!

Posted by brian on 7/17/2009, 10:20 pm, in reply to "Trying to get my Bonnie to start & run at low revs!"
86.130.183.233

if you're getting a fat spark then either the timing is out, or you are running very rich. The main jets have no real effect unless you are twisting the throttle seriously at start up. So, if you are sure that the pilet jaet isn't at fault, if the problem is in the carb, then we're down to float or float needle, I'd make absolutely certain that they're seated properly. Put the old ones back and see if the problem disappears. Cheers Brian

5

---

Message Thread: Trying to get my Bonnie to start & run at low revs! - Wayne 7/17/2009, 9:35 pm Re: Trying to get my Bonnie to start & run at low revs! - Rudi 7/19/2009, 2:56 am Re: Trying to get my Bonnie to start & run at low revs! - wayne 7/19/2009, 11:47 pm Re: Trying to get my Bonnie to start & run at low revs! - geoff 7/22/2009, 10:15 pm Re: Trying to get my Bonnie to start & run at low revs! - Rudi 7/21/2009, 4:58 am Re: Trying to get my Bonnie to start & run at low revs! - brian 7/17/2009, 10:20 pm Re: Trying to get my Bonnie to start & run at low revs! - Wayne 7/17/2009, 11:37 pm « Back to thread

---

Post a Response

Triumph Bonneville home page.Shropshire Classic Motorcycles for all T140 sparesFrame and cycle parts ,Frame and cycle parts Page 2,Electrical ,Engine parts ,Clutch,Gearbox,Carburetter,Stickers,Tools, Extras,Front Forks,Brake parts,Engine parts

EBC BRAKE PADS 10% discount to Notice Board users this week!