Posted by L.A.B. on 8/24/2009, 8:03 pm, in reply to "Rear Disc hose run"
82.22.53.127
<<Is it behind the swing arm (but on the tyre side) and up, or between the swing arm and the footrest hanger? It looks as if that#'s a bit tight.>>
The reservoir pipe should be routed outside the swinging arm, and inside of the rear engine plate, immediately to the rear of the swinging arm pivot.
A small retaining "Z" clip (part 83-7049) must be fitted inside the plate on the upper rear plate to frame mounting bolt with the clip's 'open' end facing forward, which retains the reservoir pipe and prevents it coming into contact with the swinging arm.
30
Message Thread:
« Back to thread