Workshop Trader

Post a Response

WANTED Rover 75 Cooling Fan

Posted by Mick Partington on July 27, 2007, 7:44 pm

Rover 75 2.5 v6 52 plate cooling fan wanted :)

Mick

Re: WANTED Rover 75 Cooling Fan

Posted by Tony Sefton on July 27, 2007, 8:04 pm, in reply to "WANTED Rover 75 Cooling Fan "
Tony Sefton

Hi Mick. Have you Tried Repairing the old Fan Motors. ? We Have successfully Repaired a few.
( All Sticking Brushes or Worn out Brushes. )

The Last one was a bit of a waste of time as They Now run Continuously due to a Faulty Ecu.
and another one also had a faulty Thermostat causing the fans to run Almost instantly after the Shortest of runs.

Re: WANTED Rover 75 Cooling Fan

Posted by Mick Partington on July 27, 2007, 9:07 pm, in reply to "Re: WANTED Rover 75 Cooling Fan "

Thanks Tony :), this fan has been in a bump, so the bottom part of it is missing :) so when the fan cuts in, it spins, but it aint balanced and keeps hitting the radiator, and making the whole car shake, lol,

not sure if they come just has the fan or with motor :(

Mick

Re: WANTED Rover 75 Cooling Fan

Posted by Dave Harney on July 27, 2007, 9:10 pm, in reply to "Re: WANTED Rover 75 Cooling Fan "
Dave Harney

Hi Mick,
I'm sure the last one i did (waited weeks for it too) the motor came without the fan blade. So you should be able to get blade seperately.

Regards
Dave

Re: WANTED Rover 75 Cooling Fan

Posted by Terry Wood on July 30, 2007, 9:55 pm, in reply to "WANTED Rover 75 Cooling Fan "
Terry Wood

Hello Mick
If you still need a fan blade I am sure i have one that was not used and have still not sent it back to Rovers
Let Me Know and i will have a look for it
Terry

Re: WANTED Rover 75 Cooling Fan

Posted by Mick Partington on July 30, 2007, 11:14 pm, in reply to "Re: WANTED Rover 75 Cooling Fan "

Yes Please,

Give us a ring if u have, got a couple of scrap yards who say they have them

07 802 802 974

Tia

Re: WANTED Rover 75 Cooling Fan

Posted by Mick Partington on August 9, 2007, 11:14 pm, in reply to "Re: WANTED Rover 75 Cooling Fan "

thanks Terry now have one :) :) :)

Thanks for the info about fitting, quite easy once u done one :)

Mick

« Back to index

[ Workshop Trader ]