Has any member added or replaced the console seat belt clips ? I found that California Clissic Chevy Parts sells very good ones . The hard wear is not installed . What I used was some curtain rod clips that I cut off some pieces of metal with my die grinder . And the smaller hole is perfict for the screw and prevent the seat belt clips from turning
The third picture shows the final clip after the pieces were removed and discarded and the small screw hole is perfict for the screw I used . And the large hole is good for the tab on the Seat belt clips that go through the side of the console .
on 7/11/2017, 3:09 pm
