My 68 Custom Coupe passenger window needs to be tilted in and I can't find any specific video or pics with a write up anywhere. Anyone here know how to adjust door windows?
Re: Window adjustment
Posted by Nick on 7/15/2019, 10:38 pm, in reply to "Window adjustment"
The door glass is adjusted 2 ways. The top channels have to be adjusted inward. The bottom adjustment needs to be pushed outward. Remember to put the door panel back on so the inner weatherstrip pushes the glass against the outer. Try it a couple of times. It takes a fine adjustment to get it right. The front and the back glass need to have the same pressure on the weatherstrip. NICK L72 GM Technician427impalasportcoupe
Posted by 68ss427 on 7/13/2019, 8:30 pm, in reply to "Window adjustment"
Adjusting the window tilt in or out is done by the small screws near the bottom of the door inside with the door panel removed or at least the bottom half of it away from the inside. You will see 2 screws with a round washer/ locking nut that you loosen first. Don S
I saw those and suspected they were the ones, but I tried both the one at the front and back and either I didn't turn them enough or they are not moving the window. I'll try it again and see if the window moves.