Impala SS427.com Message Board

Impala SS427.com Message Board
[ Impala SS427.com Message Board ]

'69 Impala rear control arm bushings

Posted by Tom <iframe src='https://members5.boardhost.com/impalass427/info/user=Springer+Tom' width='330' height='300' border=0 style='border:none;'> on 7/16/2019, 5:03 pm

Can someone tell me what I need for rear control arm bushings fo a '69 Impala? I want to replace all 8. Prefer Moog numbers, just want a stock ride. Thanks Tom

Re: '69 Impala rear control arm bushings

Posted by jay <iframe src='https://members5.boardhost.com/impalass427/info/user=bogslacker' width='330' height='300' border=0 style='border:none;'> on 7/19/2019, 6:46 pm, in reply to "'69 Impala rear control arm bushings"

i do not know the part numbers off hand went to my local parts store they ordered me moog not a problem the only problem if i remember was the top two were smaller i had a parts car that i took arms off of but afterward i figured out that the smaller bushings were the same size as the front A arm bushing good luck

Re: '69 Impala rear control arm bushings

Posted by Nick <iframe src='https://members5.boardhost.com/impalass427/info/user=427impalasportcoupe' width='330' height='300' border=0 style='border:none;'> on 7/19/2019, 10:11 am, in reply to "'69 Impala rear control arm bushings"

Tom. Moog or any other manufacture uses stock rubber bushings. The silicon bushings are made for competition, but they do not change the ride. New rubber bushings should not flex either when new. NICK L72

427impalasportcoupe

« Back to index

[ Impala SS427.com Message Board ]