Impala SS427.com Message Board

Impala SS427.com Message Board
[ Impala SS427.com Message Board ]

1969 Impala/Biscayne lamp

Posted by Ken P <iframe src='https://members5.boardhost.com/impalass427/info/user=ratcayne' width='330' height='300' border=0 style='border:none;'> on 7/3/2020, 2:15 pm

Looking to buy a NOS front turn signal lamp
PN 5958699. Fits 1969 Impala,Biscayne,Belair

Re: 1969 Impala/Biscayne lamp

Posted by TRQ <iframe src='https://members5.boardhost.com/impalass427/info/user=trq427' width='330' height='300' border=0 style='border:none;'> on 7/3/2020, 9:11 pm, in reply to "1969 Impala/Biscayne lamp "

Ken,, I've been looking for a RH assembly for 4 years or more,, dam hard to find so far. If you find two,,let me know. I'll do the same. Good luck

Re: 1969 Impala/Biscayne lamp

Posted by Nick <iframe src='https://members5.boardhost.com/impalass427/info/user=427impalasportcoupe' width='330' height='300' border=0 style='border:none;'> on 7/4/2020, 11:18 pm, in reply to "Re: 1969 Impala/Biscayne lamp "

The front parking lights are the same. They are held into the lower valance by 2 screws. I cleaned and removed the rust, and oiled the light sockets and removed the broken bolts. The bucket was painted white and the exterior black. To install the bulbs, I pulled the wires back and installed the new bulbs. You can use small bolts with phillip heads and nuts to secure them. I used the 2 best of the four I have. They work and look good. NICK L72

427impalasportcoupe

Re: 1969 Impala/Biscayne lamp

Posted by Ken P <iframe src='https://members5.boardhost.com/impalass427/info/user=ratcayne' width='330' height='300' border=0 style='border:none;'> on 7/4/2020, 5:32 am, in reply to "Re: 1969 Impala/Biscayne lamp "

I sure will,thanks
I have both but they are original and cruddy.Worse comes to worse I can send it out to get it anodized.

Re: 1969 Impala/Biscayne lamp

Posted by TRQ <iframe src='https://members5.boardhost.com/impalass427/info/user=trq427' width='330' height='300' border=0 style='border:none;'> on 7/4/2020, 7:20 am, in reply to "Re: 1969 Impala/Biscayne lamp "

Mine are actually decent,, but the pass side socket is bad, hoping there may be an option to replace just the socket. Thanks Ken

Re: 1969 Impala/Biscayne lamp

Posted by Ken P <iframe src='https://members5.boardhost.com/impalass427/info/user=ratcayne' width='330' height='300' border=0 style='border:none;'> on 7/4/2020, 9:27 am, in reply to "Re: 1969 Impala/Biscayne lamp "

Maybe a stupid question but is there a left and right side ? I just dug mine out to look them over and they appear to be the same.I don't have a parts book,just assembly.
Also the small square nuts that are part (tacked in) of the lamp are missing on mine.

« Back to index

[ Impala SS427.com Message Board ]