Impala SS427.com Message Board

Impala SS427.com Message Board
[ Impala SS427.com Message Board ]

'69 Impala Non-AC RH Kick Panel

Posted by Bill Thomsen <iframe src='https://members5.boardhost.com/impalass427/info/user=Bill+Thomsen' width='330' height='300' border=0 style='border:none;'> on 9/26/2021, 6:35 pm

Anyone ever take out a '69 Impala Passenger Side Non-AC Kick Panel? It seems like the Vent Assembly is attached to it. I don't know if GM glued it together or can it be separated. I got the Panel loose, but I am having trouble getting the whole assembly out. The back end of the Vent Assembly is getting hung up in the opening. Not real sure but '70 should also be the same.

Thanks

Re: '69 Impala Non-AC RH Kick Panel

Posted by Bill Thomsen <iframe src='https://members5.boardhost.com/impalass427/info/user=Bill+Thomsen' width='330' height='300' border=0 style='border:none;'> on 9/28/2021, 8:57 pm, in reply to "'69 Impala Non-AC RH Kick Panel"

With a little tilting and moving around, it just about cleared the opening, but I got it out.

Re: '69 Impala Non-AC RH Kick Panel

Posted by Nick <iframe src='https://members5.boardhost.com/impalass427/info/user=427impalasportcoupe' width='330' height='300' border=0 style='border:none;'> on 9/28/2021, 10:27 pm, in reply to "Re: '69 Impala Non-AC RH Kick Panel"

I did a lot of them. Just did My 69 with a lot of trouble. Make sure that You caulk the opening and smooth it out. It is just as hard to install. When all seems lost, it goes in. I had to seal a lot of new cars because they leaked. NICK L72

427impalasportcoupe

« Back to index

[ Impala SS427.com Message Board ]