La Manzanilla message board

Lighting a Cinsa boiler Posted by Nan Danforth on December 2, 2019, 12:55 pm Trying to light a Cinsa boiler with automatic ignition, no luck. I put it on pilot, and have tried pushing down both pilot button and blue button on top, no luck. Is there a special sequence for this? Any advice would be appreciate.

Re: Lighting a Cinsa boiler Posted by Linda Mandala on December 2, 2019, 3:40 pm, in reply to "Lighting a Cinsa boiler" Nan..you have to turn on gas....then put the dial at piloto...then hold down the button while repeatedly (mine takes a few ) pressing the other button that lights it...mine would not start on the first try but repeated clicking the spark button worked..good luck Linda

Re: Lighting a Cinsa boiler Posted by Sue Siskin on December 2, 2019, 3:52 pm, in reply to "Lighting a Cinsa boiler" Go to You Tube. I always go there to remind my self of the directions. "how to light a water heater.! Did mine this morning.

Re: Lighting a Cinsa boiler Posted by James on December 2, 2019, 3:57 pm, in reply to "Re: Lighting a Cinsa boiler" You might try with a lighter if you can't get a spark from the igniter. My igniter never seems to work.

Re: Lighting a Cinsa boiler Posted by Charley on December 2, 2019, 4:31 pm, in reply to "Lighting a Cinsa boiler" Sometimes the sparker/ igniter does not work. Use a long propane barbecue lighter to reach and light the pilot... Holding the button in for pilot 15 seconds....then release and turn dial to gas...

Re: Lighting a Cinsa boiler Posted by Dave W. on December 2, 2019, 7:45 pm, in reply to "Re: Lighting a Cinsa boiler" This is how to light one manually. Hope it helps.

« Back to index