I spent hours trying to get the image to fill the screen without warping or getting shadow problems, and the room layout didn’t make it any easier. What helped me a ton was using a guide for the right projector distance because it broke down exactly how far back you need to mount depending on screen size and projector type. I learned that even a few inches can make a huge difference for focus and edge sharpness. I also realized that ceiling height matters because you don’t want the projector sticking out in the swing path, and mounting it too low or too high can distort the image or mess with tracking sensors. I ended up marking the ideal spot on the ceiling first, checking the angle, and then fine-tuning the zoom to fill the screen without stretching. Another tip that worked for me was to use a small ladder and test swings at different distances before securing the mount permanently — seeing shadows or hotspots early saved a lot of headaches. Once it was dialed in, the picture looked crisp and the tracking was dead-on every time, and it felt amazing to finally have a setup that didn’t make me second-guess every swing.