on December 23, 2008, 11:59 pm, in reply to "Re: info required with titania sensor"
If you measure the resistance of the heater circuit, you will be able to work out what the amps draw should be, for example if the resistance was 10 ohms, divide your battery voltage (13v say) by the resistance reading - so 13/10 = 1.3 amps.
Bear in mind that the resistance may alter as the sensor gets hotter.
Regards
Dave
You can trim a sheeps wool many times, but you can only fleece it once !
Message Thread 
Seat Leon 1.8 20v Turbo AUQ 2002 - Info required with titania sensor P1116 P1103 P1297 # - Leslsmith December 22, 2008, 7:54 pm
« Back to index | View thread »