Re: mercedes 180 c non starter
Andrew Ruellan | Message modified by user UKAT5382 February 28, 2010, 6:25 pm
Hello Paul, Sorry for the late reply, but I do not get a chance to go on here much. Have you locked/unlocked the car since you have made the repair ? The control unit is hard wired to the diagnostic connector. You can get flash codes from it with a LED and a switch (or a power probe if you are carefull). the info was in a "Fault code" book, Either Autodata or the earlier Peter Combs one. If you still have problems email me your phone number and I will take you through a few tests. If you could write these up after wards it will be in the archives for everyone...... and same me a bit of time. regards Andrew Ruellan
|
Message Thread
Mercedes Benz 180 C 1.8 1995 - Non starter - Fixed # - Paul Neasham February 25, 2010, 6:46 pm
- Re: mercedes 180 c non starter - andyhyoung February 25, 2010, 7:41 pm
- Re: mercedes 180 c non starter - paul neasham February 26, 2010, 6:22 pm
- Re: mercedes 180 c non starter - Tony Sefton February 26, 2010, 7:15 pm
- Re: mercedes 180 c non starter - Shaun Dale February 26, 2010, 7:21 pm
- Re: mercedes 180 c non starter - andyhyoung February 26, 2010, 7:26 pm
- Re: mercedes 180 c non starter - Andrew Ruellan February 28, 2010, 4:21 pm
- Re: mercedes 180 c non starter - paul neasham February 28, 2010, 5:39 pm
- Re: mercedes 180 c non starter - Andrew Ruellan February 28, 2010, 6:07 pm
- Fixed # - Paul Neasham March 19, 2010, 8:28 pm
- Fixed # - Andrew Ruellan March 21, 2010, 11:58 am
- Fixed # - Michael McDowell March 21, 2010, 5:34 pm
« Back to index | View thread » |