Hi Martin,
When you save data on your Solus Pro it saves it in a format, such as .LSS or .SCM, that as far as I'm aware can only be viewed using the tool or Shopstream Connect. I usually save them to a USB memory stick and then transfer them to the PC. I am not at my PC that has SC installed but it doesn't matter where you save the file, put it on your desktop if you wish. When you have started SC you just use that to open the files from whatever location you have chosen. This file can also be emailed to anyone else but they will also need SC to view the data. As far as posting the data on here you can only do that by saving a screen shot which will be saved as a .jpg file and then using the upload image button when you are posting. The problem with this is that you will have to do loads of screen shots to get all of the data. I also don't have access to pin data at the moment but I believe that as well as an accelorator pedal position sensor it will probably have some kind of feedback from the throttle body in the form of a throttle position sensor. If you suspect that there may be a problem in this area than see if you can get a screen shot of the serial data from these pid's, along with MAF maybe, in graph form and post that.
As you know there are many things that can cause this without flagging any codes so you really do need to work through the basics. I know that a mityvac has been mentioned to you before but if you had one it would eliminate so much in just a couple of minutes. Do you have access to a fuel pressure gauge? I think these have a schrader valve on the fuel rail so the fuel pressure is another fairly quick test to carry out.
HTH's,
Bryan.