Posted by aidan birleyAidan Birley
on November 11, 2011, 8:29 am, in reply to "Re: Nissan Micra CR12E 2006 - Flat spot on acceleration, code P0312"
Hi
Check actual sensor signal voltage on BOTH sensors ( with plug connected).
I think 1.2 is the highest voltage that ECU will report on live, I had one that was over 4 v when measured.
These had a problem with ECU wrongly reporting sensor 2 fault as a sensor 1 fault
You need to check + confirm condition of BOTH sensors next.
Cheers Aidan
