MINI cooper R56
Posted by Gerard O'Leary
on July 2, 2015, 5:18 pm, in reply to "
Update "
Gerard O'Leary
Latest update ,head back on and everything fine until it gets HOT and problem is still there , misfire on no 2 cylinder , again remove any cam sensor when misfiring and problem solved until restart and temp reached . have changed the following cam sensors , vanos units , vanos actuators, 'knock' sensor , temp sensor . oil pressure is good and also stable 30 psi at idle ( range should be 10 to 30 ) while head off we double checked valve gear including concentric shaft and all tappets for damage etc everything fine . compression good on all cyls and no issue on leakdown test ,checked cat for blockage again everything ok , next we feel is perhaps engine loom even though all looks well and all ecu pins are good with no signs of damage or corrosion , any ideas ? G
|
Message Thread
MINI Cooper R56 1.6 2008 - Poor idle - Fixed # - Gerard O'Leary June 30, 2015, 7:47 am
- Update - Gerard O'Leary June 30, 2015, 2:15 pm
- Re: MINI Cooper R56 petrol - Fiachra Purcell June 30, 2015, 2:26 pm
- Update - Gerard O'Leary June 30, 2015, 5:41 pm
- MINI cooper R56 - Gerard O'Leary July 2, 2015, 5:18 pm
- Re: MINI Cooper R56 petrol - andy pethig July 3, 2015, 9:49 pm
« Back to index | View thread » |