Back to Forum
Post a Response
    replies Archived Message

    Posted by Peter Warman on February 22, 2007, 12:12 pm, in reply to "Renault Clio 1.2 16v 2002 - MAP Sensor Fault Code 332"

    Hi All

    Many thanks for the replies and the calls from Mike and Boddy

    I had a spare bit of time this morning before normal play resumed

    Put a vac gauge on and had around 17 Hg when cold and hot

    I pulled the inlet manifold off to inspect and clean the throttle body housing, also cleaned out the rear ECU Multiplugs which were full of silicon (good tip Bobby), the cover over the multiplug had also worn through the insulation on 2 wires

    All back together, but 332 Intake Air Circuit
    returned...... the MAP sensor code did not

    So still has a problem. I spoke to the trader and they want the car back to discuss further with customer. I have advised that this may be a loom problem

    Thanks for the help....... i hate these 2nd, 3rd hand jobs, you never know what been done before

    Peter



    Message Thread:


Copyright © uk autotalk