Re: Vectra/X18XE1/Simtec 70)1998/WOLOJBF68X7071590 Archived Message
Posted by Paul Gunstone on May 20, 2007, 1:11 pm, in reply to "Re: Vectra/X18XE1/Simtec 70)1998/WOLOJBF68X7071590 "
Hi Dave, As the others have said, It is most probably the ECU, but before buying a new unit, remove both plugs and check for loose fittings and/or bent ECU pins. Also scope the ECU earths, as these do fail badly and adding extra earths to the ECU can give some good results! If you have no scope, just use a multimeter set to a Mv setting and look for voltage appearing on the earth cables, (wiggle the ECU plugs at the same time). HTH mate, Gunner.
|
|