Back to Forum
Post a Response
    Re: vw transporter 2.0petrol aac engine. Archived Message

    Posted by David Davies on April 3, 2008, 6:00 pm, in reply to "vw transporter 2.0petrol aac engine."

    I think it should have an adjustment resistor on the inlet trunking to fine tune CO level.Suggest connect variable resistor to the two pin connector and observe CO level.When you have adjusted to desired CO level fit appropriate fixed value resistor.The other thing was disconnect the crankcase breather when making adjustments.CO should be 1% CO but will increase slightly when breather is reconnected.HTH.

    Message Thread:


Copyright © uk autotalk