Back to Forum
Post a Response
    subaru forester 2003 2l ej201 Archived Message

    Posted by r cruickshank on May 9, 2008, 8:57 pm

    fault code po130 reoccuring have checked fuel pressure and flow 2.5 bar, 72 litres an hour, no inlet or exhaust air leaks checked with smoke pro, manifold vacuum 0.7 bar idle,had new plugs and leads, throttle body washed out, TPS and map ok on scope, injectors also scoped-looked good,operating conditions when fault code set load 3.5%, engine temp. 85c, short term fuel trim 37.5%, long term fuel trim -0.8%, manifold pressure 39 kpa, RPM 700, dont no what to do next. Any suggestions would be appreciated.

    Message Thread:


Copyright © uk autotalk