Back to Forum
Post a Response
    52 plate Peugeot 206cc 2.0l RFN MM4.8P J2534 Pass thru Archived Message

    Posted by Terry Wood on August 25, 2008, 9:19 am

    Hello All
    Have the above vehicle that intermittently is unable to correctly control closed loop fueling
    e.g despite both oxygen sensors at ECU and Live data showing rich state .9 the ecu is increasing the fuel trim by 48% with injector duration of 9ms and 10% CO at tail pipe
    All input sensors showing normal values during the fault state

    Convinced the fault must be ECU

    I have the use of a friends J2534 Pass thru programmer while he is away on holiday and would like to see if is possible to re flash the ECU

    Does anyone have experience with J2534 Pass thru
    and where you can download the calibration files from for Peugeot

    More info on J2534 Pass thru the new standard like OBD that enables the Independent repairers to be able to Update ECUs On multi makes can be found below

    http://www.drewtech.com/products/cardaqplus.html



    Thanks
    Terry

    Message Thread:


Copyright © uk autotalk