Back to Forum
Post a Response
    Re: corsa c 2000 1200 x12xe Archived Message

    Posted by colin hogarth on October 22, 2008, 6:08 pm, in reply to "Re: corsa c 2000 1200 x12xe"

    Fixed. I started checking the wiring again today and when I got to the crank sensor there was no continuity on either wire to ecu plug, we removed the engine wiring to check for breaks etc and discovered two identical plugs at the sensor end.
    when the engine was changed they had mixed the knock sensor and crank sensor plugs up transposing them. with the loom refitted the engine started straight up with no problem.
    I had noticed the wire to the crank sensor was a bit tight but assumed the wiring had been routed slightly differently at the engine change.
    Thanks everybody for your help, another lesson learned.
    Colin.

    Message Thread:


Copyright © uk autotalk