Hello All Well its running,but it wasnt the immobiliser Pulled out immob box and aerial/harness (trapped between column and body) and all seemed fine as far as i can see this is the wiring black --------earth red ----------battery 12V orange--------ignition 12V brown---------output to code light on dash pink----------as its the short straw id say this is the communication to unlock engine management ecu
resistance of aerial harness 33.7 ohms
so... decided to connect tester to engine management and search for codes no comms and no MIL... yes theres no ign feed to ecu found faulty engine control relay and got power to one of the five power supplies had to bridge across to the others code light went out and Mil came on car fired up result switched off and disconnected bridge and noticed i now had power stripped loom and found splice between ecu and relay stripped and soldered and now all i have to do is rebuild dash Thanks for All help Regards Jez