Replies Archived Message
Posted by Sean Mc Gettigan on May 30, 2004, 3:57 pm, in reply to "V W GOLF 2000 GTI 8 VALVE AGG SIMOS 4S2 P REG NON START"
Hi John, the comm line to the engine ECU goes through the immob ECU, if you have a wiring diagram you can unplug the immob ECU and bridge the comm wire in from the dia socket to the output wire to the engine ECU to get communication.If you still have no comms then check the wire between the two ECUs. If you have a KTS you can also go straight into the engine ECU at the ECU multi-plug. Hth Sean
|
|