Peugeot 206 1.6 16v NFU 2001 (Y) - ME7.4.4 Will not fire, possible BSi fault - Fixed #
Posted by James Rushforth on December 15, 2008, 9:44 pm Message modified by board administrator February 18, 2009, 3:23 pm
Ecu. Bosch 0 261 206 942 ME7.4.4
Got the above vehicle that will not fire. BSi fault code: Bsi/engine ecu comms error. Eng ecu code: engine rpm sensor coherance. Key authorised but ecu status locked, presumably due to the comms error between bsi & ecu. Its had a genuine crank sensor before i was called to the vehicle. Using Planet, engine data is reading ??? for everything. Using Launch the data is corrupt. Baring in mind the vehicle will not run, with KOEO it is reading 1320rpm, -48degrees for both coolant temp, and air intake temp. Batt voltage reads 7.7volts. Checked earths into ecu and all ok. Just trying to find ecu pin data to check supply voltages are correct, as autodata doesn't have the early 2001 wirimg diagram. I strongly suspect the ecu is faulty, but nobody seems to be able to test this ecu. Priced one at dealer and its £532+ vat, so i obviously want to be sure its at fault. Any thoughts, or experience of this fault from anybody would be great, many thanks.
Fixed
Posted by James Rushforth on December 22, 2008, 10:27 pm, in reply to "Pug 206 (Y) 2001 1.6 16v NFU" Message modified by board administrator December 30, 2008, 1:17 pm