Seat Ibiza 1.4 BXW 2007 - All the malfunction lights are on, running ok #
Posted by Peter Cooper on April 22, 2009, 8:47 pm
Year of Manufacture *: 2007 Engine Code or Type *: BXW
Ibiza 1.4 Petrol 2007 All the malfunction lights are on when started. The car drives fine. Speedo and rev counter drops to zero every now an then. Red oil light flashing in centre display. Air bag light on. ABS light on. Sttering light on.
Hand brake light flashing with oil light and dash chime sounding.
Ive done a full scan of ECU's and found the following.
Wednesday,22,April,2009,17:54:18:25963 VCDS Version: Release 805.2 Data version: 20090111
7 Faults Found: 01309 - Power Steering Control Module (J500) 49-10 - No Communications - Intermittent 01321 - Control Module for Airbags (J234) 49-10 - No Communications - Intermittent 01317 - Control Module in Instrument Cluster (J285) 49-10 - No Communications - Intermittent 01316 - ABS Control Module 49-10 - No Communications - Intermittent 01314 - Engine Control Module 49-10 - No Communications - Intermittent 01312 - Powertrain Data Bus 37-10 - Faulty - Intermittent 01598 - Drive Battery Voltage 07-10 - Signal too Low - Intermittent
3 Faults Found: 01312 - Powertrain Data Bus 37-10 - Faulty - Intermittent 00457 - Control Module for Network (J519) 49-10 - No Communications - Intermittent 01316 - ABS Control Module 27-10 - Implausible Signal - Intermittent
------------------------------------------------------------------------------- Address 19: CAN Gateway Labels: 6N0-909-901-19.lbl Part No: 6N0 909 901 Component: 006B GATEWAY CAN 1S34 Coding: 00014 Shop #: WSC 06402
6 Faults Found: 01309 - Power Steering Control Module (J500) 49-10 - No Communications - Intermittent 01321 - Control Module for Airbags (J234) 49-10 - No Communications - Intermittent 01317 - Control Module in Instrument Cluster (J285) 49-10 - No Communications - Intermittent 01316 - ABS Control Module 49-10 - No Communications - Intermittent 01314 - Engine Control Module 49-10 - No Communications - Intermittent 01312 - Powertrain Data Bus 37-10 - Faulty - Intermittent
Ive checked the fuses on the right of dash and are ok. Ive checked fuse strips near battery.
The full scan worked ok but when I tried to access the engine ECU on its own to clear down codes it seemed to go into it ok and identified the ECU and then fault code was highlighted for a second or so then it when dark and then said no comunication.
Car only came in at 5.00 pm so not had a chance to check any more so if anyone can point me in the right direction.
Ive just noticed in the engine ECU freeze frame info the date and time are set at zero could that be important?
Hope you can help.
Peter Cooper
Re: Seat Ibiza 1.4 BXW 2007 - All the malfunction lights are on, running ok #