Petrol Diagnostics

Post a Response

Kia Rio 1.3 2003 - Cam v Crank waveform required #

Posted by David Clayson on May 13, 2009, 9:40 pm

Year of Manufacture *: 2003
Engine Code or Type *: 1300cc

Hi all

Has anyone got a good cam V crank waveform please.

Many thanks

David

Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #

Posted by Glyn Morgan <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT2543' width='330' height='300' border=0 style='border:none;'> on May 19, 2009, 2:01 pm, in reply to "Kia Rio 1.3 2003 - Cam v Crank waveform required #"

Hi David

I took these from a 2003 Rio 1343cc A3E engine this morning.

Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #

Posted by Peter Warman <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=Peter+Warman' width='330' height='300' border=0 style='border:none;'> on May 19, 2009, 2:12 pm, in reply to "Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #"
Peter Warman - Administrator

Hi Glyn

Nice Pics

Spill the beans then

VERUS.....yours, beta testing, on loan?

Peter

I want one

Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #

Posted by David Clayson <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1143' width='330' height='300' border=0 style='border:none;'> on May 21, 2009, 6:56 pm, in reply to "Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #"
David Clayson

Hi

Thanks Glyn

Will post findings soon

David

Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #

Posted by David Clayson <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1143' width='330' height='300' border=0 style='border:none;'> on May 31, 2009, 3:47 pm, in reply to "Re: Kia Rio 1.3 2003 - Cam v Crank waveform required #"
David Clayson

Hi all

Asked to look at this for another garage.
Vehicle towed in with running fault and clutch slip

Fault code present for camshaft position sensor.
Engine would start and run at about 400 rpm and would not rev
Engine vacuum low
Valve timing ok on belt and piston to valve relationship
No vacuum leaks or exhaust obsruction
Ignition timing retarded (too far to measure)
Using Glyn's waveform, pick up on flywheel 11 teeth out
Gearbox out and pick up ring loose on flywheel
New flywheel fitted and all now O.K.

Hope it might help someone in future

Many thanks

David

« Back to index

[ Petrol Diagnostics ]