Daihatsu Hi Jet 1.3 2000 - Diagnostic plug location required #
Posted by Leslie Smith on November 8, 2009, 4:54 pm Keeps cutting out with customer when normal temp. Complaint of petrol smell.Starts after leaving to cool for 10 mins. Eml on when cutting out. Never with me. Worked on these a fair bit but this time can't find diagnostic plug which is usually tucked under drivers side dash. Thought I would go to ecu to join the two diagnostic wires together. I have found the 'T' wire. Could anyone confirm that this wire is joined to the 'VF'to get the codes. I have also found this wire at the ecu.
|
Re: Daihatsu Hi Jet 1.3 2000 - Diagnostic plug location required #
Posted by Tom Sinclair
|
on November 9, 2009, 11:14 pm, in reply to "