This is the lovely 2.0 IDE direct injection engine. It logs Code P107E Throttle range limits - Programming - Signal not coherent. I've check throttle body position sensor voltages.

Track 1 - 1.1 to 4.4 volts (confirmed by live data)
Track 2 - 3.95 - 0.6 volts (confirmed by live data)

Throttle pedal

Track 1 - 0.72 to 4.52 volts (as above)
Track 2 - 3.95 to 0.6 volts (as above)

Car won't start unless you give it full throttle and even then it only rev's to about 2300 RPM. It then gradually drops off until it stalls.

It has the plastic throttle body fitted.