Petrol Diagnostics

Post a Response

Peugeot 206 KFW 2002 - None start, no MIL lamp #

Posted by Jon Otter on January 13, 2010, 12:30 pm

Year of Manufacture *: 2002
Engine Code or CC *: KFW

Peugeot 206 KFW

Im after a better wiring diagram than the one i have from Autodata, and some pin identification if anyone can help.
This vehicle was parked up one night running fine, next morning would not start, it has no MIL illuminating with ign on, checked all earths, replaced transponder aeriel with a known good one, cant really go any further without knowing pin data for ecu, and both multi functions.
Any help would be much appreciated as i dont like sending them off to dealer.
Forgot to say, i cant get comms with dec or modis for any system apart from BSI and that has a permenant fault with comms at alarm control module.

Jon

Re: Peugeot 206 KFW 2002 - None start, no MIL lamp #

Posted by Jim watson <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT5178' width='330' height='300' border=0 style='border:none;'> on January 13, 2010, 6:40 pm, in reply to "Peugeot 206 KFW 2002 - None start, no MIL lamp #"

If you can borrow Tolerance data it is shown on there, a bit difficult for me to do a screenshot as its wider than the screen im afraid, Jim.

Re: Peugeot 206 KFW 2002 - None start, no MIL lamp #

Posted by steve fisher <iframe src='https://members5.boardhost.com/ukautotalk4/info/user=UKAT1920' width='330' height='300' border=0 style='border:none;'> on January 14, 2010, 6:37 pm, in reply to "Peugeot 206 KFW 2002 - None start, no MIL lamp #"
Steve Fisher

Hi Jon

Have a look in the bm34 [under bonnet fuse box] and with the ignition on see if you have a voltage at pin 13 of the black 16 way connector

If you have then earth this pin with a power probe and you should then get comms and it should start

If it does then trace the wire [usually white with red tracer] back to the engine ecu

Hth's

Steve

« Back to index

[ Petrol Diagnostics ]